gf0761p6000v

ME-SFI [ME] control unit, component description

Type gf · topic 07.61 · version 0109 · 2008-04-07

Applies to: ENGINE 272.920 in MODEL 203 up to Model Year 8 ENGINE 272.922 in MODEL 211 ENGINE 272.940 in MODEL 203 up to Model Year 8 ENGINE 272.941 in MODEL 203 up to Model Year 8 ENGINE 272.942 in MODEL 171 up to Model Year 8 ENGINE 272.943 in MODEL 211, 219 ENGINE 272.944 in MODEL 211 ENGINE 272.945 in MODEL 251 up to Model Year 8 ENGINE 272.946 in MODEL 221 up to Model Year 8 ENGINE 272.960 in MODEL 203 up to Model Year 8 ENGINE 272.963 in MODEL 171 up to Model Year 8 ENGINE 272.964 i

Where it sits

Function group 1 Engine › 07 Mixture formation › 07.61 ME fuel injection/ ignition system — Series 164 · Series 171 · Series 203 · Series 209 · Series 211 · Series 216 · Series 219 · Series 221 · Series 230 · Series 251

Also applies to engines/gearboxes: 272 920, 272 922, 272 940, 272 941, 272 942, 272 943, 272 944, 272 945, 272 946, 272 960, 272 963, 272 964, 272 965, 272 966, 272 967, 272 970, 272 972, 272 975, 273 922, 273 923, 273 924, 273 960, 273 961, 273 962, 273 963, 273 965, 273 967, 273 968

GF07.61-P-6000V

ME-SFI [ME] control unit, component description

20.10.04

ENGINE 272.920 in MODEL 203 up to Model Year 8

ENGINE 272.922 in MODEL 211

ENGINE 272.940 in MODEL 203 up to Model Year 8

ENGINE 272.941 in MODEL 203 up to Model Year 8

ENGINE 272.942 in MODEL 171 up to Model Year 8

ENGINE 272.943 in MODEL 211, 219

ENGINE 272.944 in MODEL 211

ENGINE 272.945 in MODEL 251 up to Model Year 8

ENGINE 272.946 in MODEL 221 up to Model Year 8

ENGINE 272.960 in MODEL 203 up to Model Year 8

ENGINE 272.963 in MODEL 171 up to Model Year 8

ENGINE 272.964 in MODEL 211, 219

ENGINE 272.965 in MODEL 221 up to Model Year 8

ENGINE 272.966 in MODEL 230 up to Model Year 8

ENGINE 272.967 in MODEL 164, 251 up to Model Year 8

ENGINE 272.970 in MODEL 203 up to Model Year 8

ENGINE 272.972 in MODEL 211

ENGINE 272.975 in MODEL 221 up to Model Year 8

ENGINE 273.922 in MODEL 221 up to Model Year 8

ENGINE 273.923 in MODEL 164 up to Model Year 8

ENGINE 273.924 in MODEL 221 up to Model Year 8

ENGINE 273.960 in MODEL 211, 219

ENGINE 273.961 in MODEL 216, 221 up to Model Year 8

ENGINE 273.962 in MODEL 211

ENGINE 273.963 in MODEL 164, 251 up to Model Year 8

ENGINE 273.965 in MODEL 230 up to Model Year 8

ENGINE 273.967 in MODEL 209

ENGINE 273.968 in MODEL 221 up to Model Year 8

ENGINE 272.940 in MODEL 209

ENGINE 272.960 in MODEL 209

ME-SFI [ME] control unit, component description

P07.61-3020-01

Shown on ENGINE 272

N3/10 ME-SFI [ME] control unit

Location

The ME 9.7 control unit is located on the intake manifold supporting the engine.

ME-SFI [ME] control unit, component description

P07.61-3008-01

1 Coupling F (on-board)

2 Coupling M (engine side)

N3/10 ME-SFI [ME] control unit

Task

Controls in line with the input signals the functions of:

Ignition system/fuel injection system

Electronic accelerator/cruise control/idle speed control

Diagnosis/fault storage

Drive authorization system/immobilizer

-----------------------------------------------------------------------------------------

Design

Connection is achieved on the engine-side and on-board via two couplings interlocked via slide valves. Cooling fins on the upper side provide the necessary rejection of heat. Vibrations are suppressed by rubber brackets.

-----------------------------------------------------------------------------------------

Function

Control of fuel injection system

The ME control unit actuates the fuel injection valves separately corresponding to the firing order (sequentially) according to the input signals and the performance maps stored in the ME control unit. The ME-SFI control unit calculates the opening times (injection times) of the fuel injection valves.

Control of ignition system

The ME-SFI [ME] control unit actuates the ignition system according to the input signals and performance maps stored in the ME-SFI [ME] control unit. The ME-SFI control unit calculates the ignition angle values and controls the anti-knock control (AKC).

Control of idle speed control

The throttle valve actuator is actuated on the basis of the input signals and the performance maps stored in the ME control unit.

-----------------------------------------------------------------------------------------

Control of cruise control

The ME control unit operates the throttle valve actuator for the cruise control function on the basis of the input signals and the position of the cruise control switch.

Additional cruise control functions include variable speed limiter and Distronic.

Diagnosis/DTC memory

The ME-SFI control unit checks its inputs and outputs for plausibility and recognizes possible faults. The following faults can be distinguished:

- Faults present all the time
- Loose contact faults that have occurred while driving


The faults are erased in the ME-SFI control unit after circuit 30 is interrupted.

-----------------------------------------------------------------------------------------

Drive authorization system/immobilizer

The ME-SFI control unit is always equipped with an immobilizer. When the vehicle is locked, the drive authorization system control unit transmits information over the CAN data bus to the ME-SFI control unit, which thereupon interlocks the engine management system (fuel injection system). The engine can be started (start enable) only when the vehicle is unlocked with the authorized key again and the control unit of the drive authorization system sends information to this effect to the ME-SFI [ME] control unit via the CAN data bus.

The ME control unit is functional only with a CAN data bus and the FBS 3 drive authorization system.

Engine speed signal

The ME control unit generates the short-circuit proof engine speed signal TNA from the signals supplied by the crankshaft position sensor, and outputs them to other control units. 3 pulses are output per engine revolution.

-----------------------------------------------------------------------------------------

Actuations with STAR DIAGNOSIS

Functions can be actuated specifically for diagnostic purposes. These are listed in a menu item.

Variant coding

For adapting the ME control unit to different vehicle versions and vehicle equipment by means of matching code numbers. Coding is performed with STAR DIAGNOSIS. The variant coding can be used to code the following vehicle versions and equipment variants:

Vehicle model

National version

Transmission version

with or without TWC

-----------------------------------------------------------------------------------------

Fuel consumption signal

The consumption signal is calculated from the injection times (e.g. 8 liters/hour) and is transmitted via CAN to the trip computer in the instrument cluster.

Start recognition

The engine control unit is informed about the introduced starting procedure via the CAN message "circuit 50". This is necessary in order, for example, to trigger the start quantity control, the starter control, the post-start enrichment and the ignition timing when starting.

Computer run-on

After the ignition is switched off, the ME-SFI control unit performs a delayed-off run during which certain data memories are updated (e.g. the DTC memory). The run-on time with a warmed up engine is approx. 5 s, but may be extended to several minutes by various functions. After the fault memory has been cleared, the run-on time must expire.

Various engine operating information is transmitted via the

CAN databus from the ME control unit to the instrument cluster and to other control units which are connected to the CAN databus.