ap0100d1000a

Cleaning and preserving engine and engine compartment

Type ap · topic 01.00 · version 0102 · 2018-03-12

Applies to: Model 415, 447, 636, 638, 639, 667, 668, 670, 900, 901, 902, 903, 904, 905, 906, 907, 909, 910

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 415 · Series 447 · Series 636 · Series 638 · Series 639 · Series 667 · Series 668 · Series 670 · Series 900 · Series 901 · Series 902 · Series 903 · Series 904 · Series 905 · Series 906 · Series 907 · Series 909 · Series 910

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 415 · Series 447 · Series 636 · Series 638 · Series 639 · Series 667 · Series 668 · Series 670 · Series 900 · Series 901 · Series 902 · Series 903 · Series 904 · Series 905 · Series 906 · Series 907 · Series 909 · Series 910

AP01.00-D-1000A

Cleaning and preserving engine and engine compartment

06.03.2018

Model

415, 447, 636, 638, 639, 667, 668, 670, 900, 901, 902, 903, 904, 905, 906, 907, 909, 910

Clean and apply preservation agent

1

Switch off ignition

2

Before cleaning and applying the preservation, generously cover up the windshield, fender and the openings for the fresh air

It is necessary to cover up to ensure that no materials, e.g. cold cleaning solvent, wax or suchlike enter the inside of the vehicle.

3

Use fabric tape to mask off threaded connection of brake fluid reservoir

Remove fabric tape after applying preservation to the engine compartment.

4

Mask off bore for diaphragm chamber ventilation in pressure regulating valve in cylinder head cover


Engine 601, 602

AP01.00-P-8503-01A

5

Cover up electronic component parts


Do not aim the water jet directly at electronic components.
Otherwise, the electronic component parts may be damaged.

6

Clean engine compartment

Do not clean when the engine is at operating temperature.
Use commercially available cold cleaning solvent.

7

Clean major assembly compartment between engine and firewall

Clean carefully with minimum pressure. Only use as much water as is necessary.

Danger

Risk of explosion from pressurized spray cans

Protect cans from direct sunlight and temperatures above 50 °C

AS00.00-Z-0015-01A

8

Apply preservation agent to engine compartment


Do not spray wax onto electrical and electronic component parts, the belt drive (belts and belt pulleys), or the exhaust pipe and muffler in the major assembly compartment.
Otherwise these components could be damaged.

Apply the preservation only when the engine compartment is dry.

Wax for engine compartment (400 ml spray can)

*BR00.45-Z-1018-05A

9

After the engine wash or preservation work, lubricate the throttle control linkage

Engine 601, 602, 616

Check for ease of movement and wear.

Repair materials

Number

Designation

Order number

BR00.45-Z-1018-05A

Wax for engine compartment (400 ml spray can)

A 000 986 33 70 10

Referenced documents