Remove/install exterior detachable parts and interior trim for replacing B-pillar

AR60.00-D-0014TS

Remove/install exterior detachable parts and interior trim for replacing B-pillar

14.04.2020

Model

907.6/7, 910.6

with code T16 (Sliding door right)

Right side of vehicle

Model

907.6/7, 910.6

with code T19 (Sliding door left)

Left side of vehicle

Modification notes

12.12.2019

Method extended

Operation step 24

Shown on model 910 with code T16 (right sliding door), right side of vehicle

1

B-pillar

Shown on model 907 with code T19 (left sliding door) except code EL9 (front and rear 2-way speaker system), except code FY2 (double lock), except code T51 (left sliding door electrical closing assist) and except code T56 (electrical actuation for left sliding door), left side of the vehicle

2

Fuel filler flap

3

Filler neck

4

Lower guide rail

5

Front door sill trim

6

Protective strip

7

Frame seal

8

Frame seal

9

Lock striker

10

Contact plate

11

Guide bearing

12

Bolts

13

Bolts

Shown on model 907, right side of vehicle

17

Electrical wiring harness

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Typ 910.6 mit Motor 780.703

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on battery

Typ 910.6 mit Motor 780.703

AH54.10-P-0001-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Typ 910.6 mit Motor 780.703

AH00.00-Z-0300-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove respective hinge of front door.

AR72.10-D-2662TS

2

Remove respective sliding door.

Model 907.6/7 except code T55 (electrical actuation for the right sliding door) except code T56 (electrical actuation for left sliding door), model 910.6

AR72.16-D-1260TS

Model 907.6/7 with code T55 (electrical actuation for right sliding door), model 907.6/7 with code T56 (electrical actuation for left sliding door)

AR72.16-D-1260TSB

3

Remove respective bottom guide rail (4).

Model 907.6/7

AR72.16-D-7816TS

4

Remove fuel filler flap (2).

If left side of vehicle is damaged.

Model 910 with engine 651, model 907.6/7

AR88.60-D-6023TS

5

Remove filler neck (3).

If left side of vehicle is damaged.

Model 907.6 with engine 654.9, Models 907.6/7 with engines 642, 651, Model 910.6 with engine 651

AR47.10-D-7541TS

Model 907.6/7 with engine 274

AR47.10-D-7541TSC

6

Remove top trim from partition.

Model 907.6, 910.6 with partition and with code VA3 (load compartment interior trim up to roof height, washable)

AR68.30-D-1407TS

7

Remove bottom trim from partition.

Model 907.6, 910.6 with partition and with code VA3 (load compartment interior trim up to roof height, washable)

AR68.30-D-1408TS

8

Remove respective front door sill trim (5).

AR68.30-D-1306TS

9

Remove trim from respective sliding door entrance step module.

Model 907.6 except code V39 (people mover plastic floor) except code VK8 (plastic floor covering)

AR68.30-D-0018TSB

Model 907.6 with code V39 (people mover plastic floor), model 907.6 with code VK8 (plastic floor covering)

AR68.30-D-0018TSR

10

Remove front partition.

Model 907.6, 910.6 with code D50 (full-width partition wall) or with code D51 (full-width partition wall with 1 window) or with code D64 (partition with sliding door)

Model 907.6 with code D50 (full-width partition wall), model 907.6 with code D51 (full-width partition wall with 1 window)

AR68.74-D-0700TSR

Model 910.6 with code D50 (full-width partition wall), model 910.6 with code D51 (full-width partition wall with 1 window)

AR68.74-D-0700TSF

 Model 907.6, 910.6 with code D64 (partition with sliding door)
No reference document exists for these vehicles.

11

Remove seat base for driver's seat.

In the case of damage at driver's side.

AR91.10-D-3521TS

12

Remove seat base for front passenger seat.

In the case of damage at front passenger side.

AR91.10-D-3522TS

13

Remove respective protective strip (6).

AR88.80-D-1040TS

14

Remove respective sealing frame (7) in the repair area and position outside of the working area.

15

Remove respective sealing frame (8) in the repair area and position outside of the working area.

16

Remove respective seat belt from B-pillar (1).

AR91.40-D-1015TS

17

Remove respective electrical wiring harness (17) in the repair area and position outside of the working area.

18

Remove front roof lining.

AR68.30-D-7607TS

19

Remove center roof lining.

Model 907.6/7 with code V36 (Headliner)

AR68.30-D-7609TSR

20

Remove respective lock striker (9).

 Bolt, lock striker to B-pillar

*BA72.10-N-1007-01TS

21.1

Remove respective contact plate (10).

Model 907.6/7 except code EL9 (front and rear 2-way speaker system) except code FY2 (double lock) except code T50 (right electrical sliding door closing assist) except code T55 (electrical actuation for right sliding door) right side of the vehicle, model 907.6/7 except code EL9 (front and rear 2-way speaker system) except code FY2 (double lock) except code T51 (left electrical sliding door closing assist) except code T56 (left electrical actuation for sliding door) left side of the vehicle, model 910.6

 To do this, unscrew screw/bolts (13).

21.2

Remove respective cover from B-pillar.

Model 907.6/7 with code EL9 (front and rear 2-way speaker system), Model 907.6/7 with code FY2 (double lock), Model 907.6/7 with code T50 (electrical right sliding door closing assist) right side of the vehicle, Model 907.6/7 with code T55 (electrical actuation for right sliding door) right side of the vehicle, Model 907.6/7 with code T51 (electrical left sliding door closing assist) left side of the vehicle, Model 907.6/7 with code T56 (electrical actuation for left sliding door) left side of the vehicle

 To do this, unscrew screw/bolts.

22

Remove respective guide bearing (11).

 To do so, remove screws/bolts (12).

 Striker pin to B-pillar

*BA72.16-N-1005-01TS

23

Remove respective underfloor paneling.

Model 907.6/7 with code XM1 (Noise abatement measures), model 910.6 with engine 651 with code XM1 (Noise abatement measures), model 910.6 with engine 780.703

AR61.30-D-1001TS

24

Remove HV battery module.

* Applies to Europe only

Model 910.6 with engine 780.703

AR47.70-D-0001TE

25

Install in the reverse order.

 Front door

Number

Designation

Model 907

Model 910

BA72.10-N-1007-01TS

Bolt, lock striker to B-pillar

Nm

20

20

 Sliding door

Number

Designation

Model 907.6/7/8, 910.6

BA72.16-N-1005-01TS

Striker pin to B-pillar

Nm

30