Remove/install seat base for front passenger seat

AR91.10-D-3522TS

Remove/install seat base for front passenger seat

02.05.2018

Model

907, 910

Shown on model 907 with code H00 (Hot air duct to rear passenger compartment)

1

Seat frame

4

Cover

2

Seat base cover

5

Bolts

3

Floor covering

6

Bolts

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Remove front passenger seat.

Model 907, 910
except code SR8 (Swivel base for driver' seat)

AR91.10-D-1000TS

1.2

Remove turn plate with installed front passenger seat.

Model 907, 910
with code SR8 (Swivel base for driver' seat)

AR91.10-D-1456TS

 Do not disconnect front passenger seat from turn plate.

2

Remove seat base cover (2).

3

Remove battery carrier of auxiliary battery in vehicle interior.

Model 907, 910
with code E2I (Auxiliary battery for retrofitted consumers, interior)

AR54.10-D-0031TS

4

Release floor coverings (3) until the screws (5) are accessible.

Model 910

AR68.80-D-0006TSF

Model 907

AR68.80-D-0006TSR

5

Remove cover (4).

Model 907
with code H00 (Hot-air duct to passenger compartment)

6

Remove screws (5, 6).

 Bolt, seat base to vehicle floor

*BA91.10-N-1007-01TS

7

Remove seat base (1) and remove from the vehicle.


Remove seat base (1) carefully and when doing so pay attention to electrical wiring harnesses.
Otherwise damage to the vehicle's electrical system can occur.

8

Install in the reverse order.

 Front seats

Number

Designation

Model 907, 910

BA91.10-N-1007-01TS

Bolt, seat base to vehicle floor

Nm

55