D68.74-1132-77
Shown with CODE D50 (Full-width partial wall) |
1 | Partition wall | 2 | Bolts |
Shown with code D50 (full-width partition wall) and code T16 (right sliding door) |
1 | Partition wall |
3 | Bolts |
4 | Bolts |
5 | Tie-down eye |
D68.74-1133-82
Shown with code D50 (full-width partition wall), code D03 (roof and rear-end doors, high version) and code T16 (right sliding door) |
1 | Partition wall |
3 | Bolts |
4 | Bolts |
5 | Tie-down eye |
D68.74-1137-82
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on self-locking nuts and bolts | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Adjust driver's seat toward front in the top position. | ||
2 | Take jack behind the driver's seat out of the vehicle. | Model 910.6 with code Y36 (jack) | |
3.1 | Adjust front passenger seat toward the front in the top position. | Model 910.6 except code S23 (two-seater front passenger seat) | |
3.2 | Remove front passenger bench seat. | Model 910.6 with code S23 (two-seater front passenger seat) | |
4 | Remove front screws (2) from the partition (1) at the bottom. | ||
5 | Remove tie-down eyes (5) in the load compartment from the B-pillars. | Screw, tie-down eye to B-pillar | |
6 | Remove screws (3) in the load compartment from the partition (1). | ||
7 | Unscrew screw/bolts (4). | Installation: First, position all screws (2, 3, 4) and then tighten. | |
The number of screws (4) varies depending on equipment installed. | |||
8 | Guide partition (1) out of the vehicle. | | |
9 | Install in the reverse order. | ||
10 | Remove detachable parts from the partition (1). | If new partition (1) is installed. | |
Detachable parts vary depending on equipment installed in the vehicle. |
Powiązane dokumenty
- ah0000n000101a Wskazówki dotyczące samozabezpieczających śrub i nakrętek
- ah6800n000101s Wskazówki dotyczące wykonywania prac naprawczych we wnętrzu pojazdu
- ar9110d1035ts
- as0000z001701a Niebezpieczeństwo obrażeńo elementy pojazdu o ostrych krawędziach.