D47.10-A003-09
1 | Fuel tank cap | 5 | Sealing | 8 | Protective ring | ||
2 | Cover | 6 | Electrical connector | 9 | Clamp | ||
3 | Bolts | 7 | Filler neck | 11 | Protection | ||
4 | Screw |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Open fuel filler cap (1). | in order to relieve pressure in the fuel tank. | |
2 | Empty the fuel tank. | ||
3 | Unscrew screws (3) and remove cover (2). | Installation: Ensure that seal is seated correctly on the cover (2). | |
| Check | ||
4 | Check seal on cover (2). | Depending on the findings, | |
| |||
Replace seal on cover (2). | |||
5 | Unscrew screw (4). | Installation: Replace lock nut for screw (4). | |
6 | Open cable tie, slide protection (11) to one side and remove hose at filler neck (7). | Installation: Replace cable tie. | |
7 | Remove sealing (5). | Installation: Ensure that sealing (5) is seated correctly. | |
8 | Remove clip (9) from filler neck (7). | ||
9 | Release and disconnect electrical connector (6). | ||
10 | Remove filler neck (7). | ||
11 | Remove protective ring (8) from filler neck (7). | If protective ring (8) or filler neck (7) are replaced. | |
12 | Install in the reverse order | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
13 | Perform engine test run; in this connection, check fuel system in area of filler neck (7) for leaks. | |
Powiązane dokumenty
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar4710d4001ts
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.
- as0000z001001a Zagrożenie życia na skutek ześlizgnięcia lub spadnięcia pojazdu z podnośnika.
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.
- as4900z000101a Niebezpieczeństwo poparzenia, uduszenia i zatrucia podczas prac przy układzie wydechowym i połączonych z nim elementach. Niebezpieczeństwo uduszenia i zatrucia przez wdychanie gazowych i stałych składników spalin. Niebezpieczeństw