Remove/install underbody paneling

AR61.30-D-1001TS

Remove/install underbody paneling

03.12.2019

Model

907, 910

Modification notes

12.07.2019

Method extended

Operation steps 1, 2

AR61.30-D-1001-01TS

12.07.2019

Method extended

Operation step 2

AR61.30-D-1001-02TS

Shown on model 907

1

Underfloor paneling, left

2

Underfloor paneling, right

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Typ 910 mit Motor 780.703

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

 

Remove/install

1

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

2

Remove left underfloor paneling (1).

AR61.30-D-1001-02TS

3

Remove right underfloor paneling (2).

AR61.30-D-1001-01TS

4

Install in the reverse order.