Remove/install moldings

AR88.80-D-1040TS

Remove/install moldings

13.02.2018

Model

907, 910

Shown on model 907.857 with code LB1 (Marker lamps, side) and with code T16 (Sliding door, right), right side of vehicle

1

Protective strip

6

Protective strip

13

Side marker lamp (with code LB1 (Marker lamps, side))

2

Protective strip

8

Bolts

14

Side marker lamp (with code LB1 (Marker lamps, side))

3

Protective strip

9

Bolts

15

Side marker lamp (with code LB1 (Marker lamps, side))

4

Protective strip

10

Screw

5

Protective strip

11

Screw

Model 907.2, left side of vehicle

7

Protective strip

12

Bolts

 

Remove/install

1

Remove respective protective strip (1)

 For this purpose, unclip protective strip (1).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

2

Remove respective protective strip (2)

 For this purpose, remove screws (8) and unclip protective strip (2).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

3

Remove respective protective strip (3)

 Model 907, 910
except code LB1 (Side marker lights)
For this purpose, unclip protective strip (3).

 Model 907, 910
with code LB1 (Side marker lights)
For this purpose, unclip protective strip (3) and disconnect electrical connector of side marker lamp (13).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

4

Remove respective protective strip (4)

Model 907.6/7/8, 910.6

 Except code T16 (Sliding door, right) right side of vehicle, except code T19 (Sliding door, left) left side of vehicle
For this purpose, unclip protective strip (4).

 With code T16 (Sliding door, right) right side of vehicle, with code T19 (Sliding door, left) left side of vehicle
For this purpose, remove screws (9) and unclip protective strip (4).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

5

Remove respective protective strip (5)

Model 907.6/7/8, 910.6

 Except code LB1 (Marker lamps, side)
For this purpose, remove screw (10) and unclip protective strip (5).

 With CODE LB1 (Marker lamps, side)
For this purpose, remove screw (10), unclip protective strip (5) and disconnect electrical connector of side marker lamp (14).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

6

Remove respective protective strip (6)

Model 907.6/7/8, 910.6

 Except code LB1 (Marker lamps, side)
For this purpose, remove screw (11) and unclip protective strip (6).

 With CODE LB1 (Marker lamps, side)
For this purpose, remove screw (11), unclip protective strip (6) and disconnect electrical connector of side marker lamp (15).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

7

Remove respective protective strip (7)

Model 907.2

 For this purpose, remove screws (12) and unclip protective strip (7).

 Installation: Check retaining clips for damage.

 Long wedge

*115589035900

Depending on findings



Replace damaged retaining clips.

8

Install in the reverse order