Remove/install center roof trim

AR68.30-D-7609TSR

Remove/install center roof trim

17.07.2018

Model

907.6/7

Shown on model 907.7 with code T16 (right sliding door)

1

Coat hook

4

Belt height adjustment

8

Center headliner

2.1

Left B-pillar trim panel

5

Retaining clips

9

Retaining clips

2.2

Right B-pillar trim panel

6

Expansion rivet

10

Retaining clips

3

Grab handle

7

Front headliner

11

Lugs

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove covers of the clothes hooks (1) upward.

 Long wedge

*115589035900

2

Remove screws and remove clothes hooks (1) from the B-pillar trims (2.1, 2.2).

3

Remove cover of the grab handle (3).

Model 907.6/7
with code T74 (Handle for entrance)

 Clip remover

*452589016300

4

Remove screws and remove grab handle (3).

Model 907.6/7
with code T74 (Handle for entrance)

5

Unclip B-pillar trims (2.1, 2.2) in top area.

 Installation: Ensure that the seat belt height adjustment is assembled correctly (4).

6

Remove corresponding dome lamps.

AR82.20-D-0117TSR

7

Remove front section of the air duct of the roof-mounted air conditioning system.

Model 907.6/7
with code H08 (Roof-mounted air conditioning system, reinforced)
Model 907.6/7
with code HH7 (Roof-mounted air conditioning system, basic)
Model 907.6/7
with code HK4 (Rear air conditioning, reinforced)

AR83.50-D-7980-01TSR

8

Unclip retaining clips (5) in the rear area of the front roof lining (7).

 Installation: Replace damaged retaining clips (5).

 Clip remover

*452589016300

9

Remove expansion rivets (6) of the center roof lining (8) in the front area.

 The front roof lining (7) conceals the expansion rivets (6).

 Clip remover

*452589016300

10

Remove top expansion rivet from the C-pillar on the side of the sliding door.

Model 907.6/7
with code T16 (Sliding door right)
Model 907.6/7
with code T19 (Sliding door left)

 Clip remover

*452589016300

11

Detach sealing frame in sliding door portal in the area of the center roof lining (8).

Model 907.6/7
with code T16 (Sliding door right)
Model 907.6/7
with code T19 (Sliding door left)

12

Unclip retaining clips (9) in the rear area of the center roof lining (8).

 Installation: Replace damaged retaining clips (9).

 Clip remover

*452589016300

13

Unclip retaining clips (10) in the center area of the center roof lining (8).

 Installation: Replace damaged retaining clips (10).

 Clip remover

*452589016300

14

Unhook shackles (11) of the center roof lining (8) on the opposite side of the sliding door.

 Removal: Slightly press the shackles (11) upward in the area of the cutouts with the  long wedge; while doing so, pull outward and unhook.

 Long wedge

*115589035900

15

Guide electrical wiring harnesses of the dome lamps out of the center roof lining (8).

16

Pull center roof lining (8) out of the front roof lining (7) and out of the B-pillar trims (2.1, 2.2), lower carefully, and remove from the vehicle.

 Helper required.

17

Install in the reverse order.



Check

18

Perform function test of the dome lamps.