| Checking | ||
1 | Checking rear axle camber | Camber at vehicle level | |
Permissible rear axle camber between right and left vehicle side | |||
The camber on the rear axle is not adjustable. | |||
If substantial deviations in the rear axle camber are found, the cause may be one of the following: Excessive difference in the vehicle level between the left and right sides of the vehicle. Accident damage to the frame floor. Discrepancies in the levels of the mounting points for the rear axle carrier between right and left body side. Experience shows that deformations caused by an accident also has an effect on the toe. Check for impermissible deformation on body. Refer to: | |||
Check accident vehicles and vehicles possibly damaged in an accident. |
Test values for rear axle camber
Number | Designation | Model 211.0/2/6 | Model | ||
BE40.20-P-1001-09T | Camber at vehicle level | +4.2° | ° | -0° 30' (30') | -0° 30' (30') |
+3.1° | ° | -0° 40' (30') | -0° 40' (30') | ||
+2.1° | ° | -0° 52' (30') | -0° 52' (30') | ||
+1.0° | ° | -1° 04' (30') | -1° 04' (30') | ||
-0.0 ° | ° | -1° 18' (30') | -1° 18' (30') | ||
-1.1° | ° | -1° 30' (30') | -1° 30' (30') | ||
-2.1° | ° | -1° 43' (30') | -1° 43' (30') | ||
-3.2° | ° | -1° 58' (30') | -1° 58' (30') | ||
-4.2° | ° | -2° 12' (30') | -2° 12' (30') | ||
-5.3° | ° | -2° 30' (30') | -2° 30' (30') | ||
-6.3° | ° | -2° 45' (30') | -2° 45' (30') | ||
BE40.20-P-1002-09T | Permissible difference in rear axle camber | ° | 30' | 30' | |