AR20.00-W-1142J | Drain/fill in coolant | 13.12.11 |
ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine
ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976
ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976
ENGINES 925.9 in MODELS 970, 972, 974
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2
ENGINES 926.9 in MODEL 958.0
W20.00-1009-11
Illustrated on model 950
1 Cap
W20.00-1019-01
2 Drain screw
3 Drain pipes
4 Drain screw
W20.00-1018-01
W20.00-1005-01
5 Retarder coolant hoses
(only on vehicles with code (BA9) Voith secondary retarder R 115)
6 Heat exchanger drain plug
(only on vehicles with code (BA1) Performance-optimized Voith retarder)
W20.00-1017-01
Modification notes
6.7.11 | Value modified: Coolant drain plug on radiator | Engine 900.9 Engine 902.9 Engine 924.9 Engine 925.9 |
Drain | |||
Danger! | Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. | |
| Notes on coolant | ||
1 | Open maintenance flap | ||
2 | Unscrew cap (1). | ||
3 | Set temperature selection wheel for the heater to the maximum heat output and switch on ignition | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
4 | Tilt cab | ||
| Notes on tilting the cab | ||
5 | Drain coolant at radiator | To do this place drain hose on the drain fitting (3) and loosen drain screw (2). Collect coolant in clean container. | |
6 | Drain coolant at crankcase | Loosen drain plug (4). Collect coolant in clean container. | |
7 | Remove both retarder coolant hoses (5) | Only on vehicles with code (BA9) Voith secondary retarder R 115. | |
Collect coolant in clean container. | |||
8 | Remove heat exchanger drain plug (6) and drain off coolant | Only on models fitted with code (BA1) Performance-optimized Voith retarder. | |
Collect coolant in clean container. | |||
9 | Switch off ignition | ||
Filling | |||
10 | Attach both retarder coolant hoses (5) | Only on vehicles with code (BA9) Voith secondary retarder R 115. | |
Check coolant hoses and hose clamps for damage; replace if necessary. | |||
11 | Tighten drain plug on heat exchanger (6) | Only on models fitted with code (BA1) Performance-optimized Voith retarder. | |
| |||
Slightly grease new sealing ring. | |||
12 | Tighten drain plug (4) on cylinder crankcase | Replace sealing ring. | |
| |||
13 | Tighten drain screw (2) on cooler and remove drain hose | | |
14 | Check coolant for soiling | In the case of strong soiling the coolant must generally be replaced; if necessary.: | |
Remove grease and scale in the cooling system | |||
15 | Check coolant with anti-freeze tester | In the case of low antifreeze protection, replace the anti-frost protection part or replace the coolant. | |
| |||
16 | Pour in coolant | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
17 | Start engine and bleed cooling and heating system | Run engine for about 5 minutes at varying rotational speeds. Top off coolant constantly to the bottom edge of the filler neck. | |
18 | Turn off engine | ||
19 | Screw down cap (1) | ||
20 | Inspect cooling system for leaks | Visual inspection. | |
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
21 | Lower cab | ||
| Notes on tilting the cab | ||
22 | Close maintenance flap |
Crankcase, timing case cover, end cover
Number | Designation | Engines 900.9, 902.9, 904.9, 906.9 | Engine 924.9, 925.9, 926.9 | ||
BA01.40-N-1004-01C | Coolant drain plug to crankcase | Nm | 30 | 30 | |
Radiator, coolant hoses
Number | Designation | Engine | Engine | Engine | |
BA20.20-N-1001-01D | Coolant drain plug on radiator | Nm | 4 | 4 | 4 |
Radiator, coolant hoses
Number | Designation | Engine | Engine | |
BA20.20-N-1001-01D | Coolant drain plug on radiator | Nm | 4 | 4 |
Retarder
Number | Designation | Models | ||
BA43.30-N-1015-01E | Coolant drain plug to heat exchanger | Nm | 25 | |
Engine cooling system
Number | Designation | Engine 900.9 in model 375.1, 970, 972, 975, 976 | Engine 902.9, in model 375.1, 970, 972, 974, 975, 976 | Engine 902.9 in model 375.3, 950, 952, 953, 954 without code BA1 | ||
BF20.00-N-1001-01C | Coolant | Total filling capacity | l | 19 | 23 | 22 |
Anticorrosion/antifreeze agent down to -37°C | L | 9.5 | 11.5 | 11 | ||
Anticorrosion/antifreeze agent down to -45°C | L | 10.5 | 13.0 | 12.0 | ||
Specifications for Operating Fluids | Sheet | |||||
Sheet | ||||||
Sheet | ||||||
Engine cooling system
Number | Designation | Engine 902.9 in model 950, 952, 953, 954 with code BA1 | Engine | Engine 924.9 in models 958.0, 970, 972, 974, 975, 976 | ||
BF20.00-N-1001-01C | Coolant | Total filling capacity | l | 37.0 | 48 | 19 |
Anticorrosion/antifreeze agent down to -37°C | L | 18.5 | 24 | 9.5 | ||
Anticorrosion/antifreeze agent down to -45°C | L | 20.5 | 26.5 | 10.5 | ||
Specifications for Operating Fluids | Sheet | |||||
Sheet | ||||||
Sheet | – | |||||
Engine cooling system
Number | Designation | Engine 925.9 in models 970, 972, 974 | Engine 926.9 in models 950, 952, 953, 954, 958.2 without code BA1 or BA9 | Engine 926.9 in models 950, 952, 953, 954, 958.2 with code BA1 | ||
BF20.00-N-1001-01C | Coolant | Total filling capacity | l | 23.0 | 22 | 37 |
Anticorrosion/antifreeze agent down to -37°C | L | 11.5 | 11 | 18.5 | ||
Anticorrosion/antifreeze agent down to -45°C | L | 13.0 | 12.0 | 20.5 | ||
Specifications for Operating Fluids | Sheet | |||||
Sheet | ||||||
Sheet | ||||||
Engine cooling system
Number | Designation | Engine 926.9 in models 950, 952, 953, 954, 958.2 | Engine 926.9 in model 957 | Engine 926.9 in model 958.0 | ||
BF20.00-N-1001-01C | Coolant | Total filling capacity | l | 40 | 48 | 23 |
Anticorrosion/antifreeze agent down to -37°C | L | 20 | 24 | 11 | ||
Anticorrosion/antifreeze agent down to -45°C | L | 22 | 26.5 | 12 | ||
Specifications for Operating Fluids | Sheet | |||||
Sheet | ||||||
Sheet | – | – | ||||
Repair materials
Number | Designation | Order number |
BR00.45-Z-1062-06A | Lubricating grease, Olista Longtime, DB supply specification 6804.60 | A 001 989 36 51 10 |
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ah6080n000301a Oplysninger om tipning af førerhus
- ar2000w1030j
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes