ap8330d8312a

Air conditioning system - check refrigerant level

Typ ap · téma 83.30 · verze 0110 · 2004-11-08

Platí pro: MODELS 638.0 /1 /2 (except 638.09 /19 /29) with CODE (H06) Air conditioning MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning with CODE (HH6) Air conditioning, roof equipment with CODE (HH9) Automatic air conditioning "Tempmatic"

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.30 Klimatizace — Řada 638 (modely 01*, 03*, 06*, 07*, 11*, 13*, 16*, 17*, 21*, 23*, 24*, 27*) · Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.5 Klimatizace kompletní — Řada 638 (modely 01*, 03*, 06*, 07*, 11*, 13*, 16*, 17*, 21*, 23*, 24*, 27*) · Řada 901 (modely 0**, 3**, 4**) · Řada 902 (modely 0**, 3**, 4**) · Řada 903 (modely 0**, 3**, 4**) · Řada 904 (modely 0**, 3**, 4**)

AP83.30-D-8312A

Air conditioning system - check refrigerant level

15.9.94

MODELS 638.0 /1 /2 (except 638.09 /19 /29) with CODE (H06) Air conditioning

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4
with CODE (H06) Air conditioning
with CODE (HH6) Air conditioning, roof equipment
with CODE (HH9) Automatic air conditioning "Tempmatic"

Air conditioning system - check refrigerant level
Air conditioning system - check refrigerant level

N83.30-2130-01

Model 638

Models 901, 902, 903, 904

N83.30-2119-01

1

Clean inspection glass (arrow) on receiver/drier

2.1

Detach cable connector from pressure switch (1)

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

2.2

Unplug connector (2) from pressure switch (1)

Model 638

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

3

Start engine

Run engine at idling speed.

4

Switch on air conditioning

5

Switch blower on.

Set to maximum speed

6

Restore electrical connection to pressure switch (1).

Observe inspection glass (arrow) at fluid reservoir

Refrigerant must rise shortly after switching on electromagnetic clutch and then flow free of bubbles
(i.e. refrigerant no longer visible).

Even if the correct quantity is filled, foam or a few bubbles may be present at higher ambient temperatures (> 35 °C).

If refrigerant is lost or a leak is suspected in the system the correct filling quantity can only be guaranteed by completely emptying the system and refilling.

The refrigerant may only be replaced by trained specialists in workshops equipped for this.

Odkazované dokumenty