si3225p0004a

Service Information: Assembly of suspension struts and shock absorbers

Vrsta si · tema 32.25 · različica 0102 · 2016-11-11

Velja za: Model all

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 32 Vzmetenje › 32.25 Blažilniki, blažilne noge, vzmetne noge — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 20 podvozje › 20.16 vzmetenje › 20.16.30 vzmet/vzmetni meh/blažilnik/vzmetna noga — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 20 podvozje › 20.20 regulacija nivoja podvozja › 20.20.30 vzmetni meh/blažilnik/vzmetna noga — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 20 podvozje › 20.21 regulacija nagibanja › 20.21.31 blažilnik/vzmetna noga — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

Velja tudi za motorje/menjalnike: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI32.25-P-0004A

Service Information: Assembly of suspension struts and shock absorbers

07.11.2016

Model

all

Service Information: Assembly of suspension struts and shock absorbers

Shown on model 211

1

Damper tube

2

Piston rod

a

Friction marks on sealing piston

b

Without friction marks on sealing piston

P32.25-2276-12

Due to current inspection findings on front-axle shock absorbers in model series 211 we would like to notify you here about how to proceed when installing and removing or disassembling/assembling shock absorbers and struts.

No impact wrench must be used while loosening or tightening the nut at piston rod (2).
The piston rod (2) also rotates and this could lead to friction marks (arrow) in the damper tube (1) and at sealing piston (a).

As described in the relevant AR document "Disassembling/assembling suspension struts" (AR32.25-P-1018*), the piston rod must be counterheld using a suitable tool at the upper end when releasing and tightening.

Turning with the impact wrench/driver chips are created, which are deposited in the sealing piston and which in turn damage the piston rod sealing.
In this instance the damper sealing capability is no longer given.