AR40.20-P-0263P | Adjust camber and caster at the front axle | 19.9.11 |
MODEL 171
MODEL 203 (except 203.08 /09 /28 /29)
MODEL 209.3 except CODE (P98) Black Series
MODEL 209.4
P40.20-2073-09
A Camber
+4 mm range of adjustment - 20' camber
- 4 mm adjustment path +20' camber
B Caster
+4 mm adjustment path +25' caster
- 4 mm adjustment path - 25' caster
Modification notes
12.7.10 | Self-locking nut (repair kit) cross strut to front axle carrier | Model 171 | |
12.7.10 | Self-locking nut (repair kit) strut rod to front axle carrier | Model 171 |
Adjust | |||
1 | Raise vehicle at front axle | ||
2 | Install repair bolt | Screw on the nut of the repair bolt until it abuts, but do not tighten yet so that the rubber mount of the torque strut or cross strut can twist when the vehicle is rocked to settle the suspension. | |
Model 203.7: If the strut rod has a rubber mount with round hole, a rubber mount with elongated hole must be installed. | |||
Camber at vehicle level | |||
Model 171 except code 486 Sports suspension | |||
Model 171 with code 486 Sports suspension | |||
Model 203 up to 03/2004 with code 482 Suspension for increased ground clearance | |||
Model 203 up to 03/2004 except code 482 Suspension for increased ground clearance or | |||
Model 203 up to 03/2004 with code 486 MB Sports suspension | |||
Model 203 from 04/2004 | |||
Model 209 | |||
Permissible difference in front axle camber between right and left sides of the vehicle | |||
Model 171 | |||
Model 203 up to 03/2004 | |||
Model 203 from 04/2004 | |||
Model 209 | |||
Check caster and assign to tabular value | |||
Model 171 | |||
Model 203 | |||
Model 209 | |||
Permissible difference in caster | |||
Caster | |||
3 | Check the vehicle level at the front axle again after the camber and caster adjustment | The vehicle level must match the dimension established during the initial measurement. | |
4 | Tighten nut of repair bolt | The repair bolt may not be turned once it has been fixed in place. When tightening the nut, counterhold the repair bolt otherwise the lock tabs in the rubber mount will be sheared off. | |
| |||
| |||
Model 171 | |||
Model 171 |
Inspection and adjusting values for front-axle camber
Number | Designation | Model | Model | ||
BE40.20-P-1001-13K | Camber at vehicle level | +1.1° | -1°30' (20') | - | |
+1.5° | -1°30' (20') | - | |||
+1.9° | -1°30' (20') | - | |||
+2.3° | -1°30' (20') | - | |||
+2.7° | -1°29' (20') | - | |||
+3.1° | -1°29' (20') | - | |||
+3.5° | -1°25' (20') | - | |||
+3.9° | -1°25' (20') | - | |||
+4.3° | -1°24' (20') | - | |||
BE40.20-P-1002-13K | Camber at vehicle level | -0.8° | - | -1°30' (20') | |
-0.4° | - | -1°30' (20') | |||
0.0° | - | -1°30' (20') | |||
+0.4° | - | -1°30' (20') | |||
+0.8° | - | -1°30' (20') | |||
+1.2° | - | -1°30' (20') | |||
+1.6° | - | -1°30' (20') | |||
+2.0° | - | -1°30' (20') | |||
+2.4° | - | -1°30' (20') | |||
BE40.20-P-1003-13K | Permissible difference in front axle camber between right and left sides of the vehicle | ° | 24' | 24' | |
Inspection and adjusting values for front-axle camber
Number | Designation | Model | Model | Model | |
BE40.20-P-1001-13B | Camber at vehicle level | +13.4° | - | - | +0°20' (20') |
+13.1° | - | - | +0°17' (20') | ||
+12.8° | - | - | +0°14' (20') | ||
+12.5° | - | - | +0°12' (20') | ||
+12.2° | - | - | +0°10' (20') | ||
+11.9° | - | - | +0°7' (20') | ||
+11.6° | - | - | +0°5' (20') | ||
+11.3° | - | - | +0°2' (20') | ||
+11.0° | - | - | +0°0' (20') | ||
+10.7° | - | - | -0°2' (20') | ||
+10.4° | - | - | -0°4' (20') | ||
+10.1° | - | - | -0°7' (20') | ||
+9.8° | - | - | -0°8' (20') | ||
+9.5° | - | - | -0°10' (20') | ||
+9.2° | - | - | -0°12' (20') | ||
+8.9° | - | - | -0°14' (20') | ||
BE40.20-P-1002-13B | Camber at vehicle level | +8.6° | - | -0° 16' (20') | - |
+8.3° | - | -0° 17' (20') | - | ||
+8.0° | - | -0° 19' (20') | - | ||
+7.7° | - | -0° 20' (20') | - | ||
+7.4° | - | -0° 22' (20') | - | ||
+7.1° | - | -0° 23' (20') | - | ||
+6.9° | - | -0° 24' (20') | - | ||
+6.5° | - | -0° 24' (20') | - | ||
+6.2° | - | -0° 26' (20') | - | ||
+5.9° | - | -0° 27' (20') | - | ||
+5.6° | - | -0° 28' (20') | - | ||
+5.3° | - | -0° 30' (20') | - | ||
+5.0° | - | -0° 31' (20') | - | ||
+4.7° | - | -0° 33' (20') | - | ||
+4.4° | - | -0° 34' (20') | - | ||
BE40.20-P-1003-13B | Camber at vehicle level | +5.9° | -0° 28' (20') | - | - |
+5.6° | -0° 30' (20') | - | - | ||
+5.3° | -0° 31' (20') | - | - | ||
+5.0° | -0° 32' (20') | - | - | ||
+4.7° | -0° 33' (20') | - | - | ||
+4.4° | -0° 34' (20') | - | - | ||
+4.1° | -0° 35' (20') | - | - | ||
+3.8° | -0° 36' (20') | - | - | ||
+3.5° | -0° 37' (20') | - | - | ||
+3.2° | -0° 37' (20') | - | - | ||
+2.9° | -0° 38' (20') | - | - | ||
+2.6° | -0° 38' (20') | - | - | ||
+2.3° | -0° 39' (20') | - | - | ||
+2.0° | -0° 39' (20') | - | - | ||
BE40.20-P-1005-13B | Permissible difference in front axle camber between right and left sides of the vehicle | ° | 24' | 24' | 24' |
Inspection and adjusting values for front-axle camber
Number | Designation | Model | |
BE40.20-P-1001-13BP | Camber at vehicle level | +13.6° | +0° 22' (20') |
+12.6° | +0° 13' (20') | ||
+11.6° | +0° 05' (20') | ||
+10.6° | -0 ° 03 ' (20 ') | ||
+9.6° | -0° 10' (20') | ||
+8.6° | -0° 16' (20') | ||
+7.6° | -0° 21' (20') | ||
+6.6° | -0° 26' (20') | ||
+5.6° | -0° 30' (20') | ||
+4.6° | -0° 33' (20') | ||
+3.6° | -0° 37' (20') | ||
+2.6° | -0° 38' (20') | ||
+1.6° | -0° 40' (20') | ||
BE40.20-P-1002-13BP | Permissible difference in front axle camber between right and left sides of the vehicle | ° | 24' |
Inspection and adjusting values for front-axle camber
Number | Designation | Model 209 except | |
BE40.20-P-1001-13F | Camber at vehicle level | +13.6° | +0° 22' (+16'/-28') |
+12.6° | +0°13'(+16'/-28') | ||
+11.6° | +0°05'(+16'/-28') | ||
+10.6° | -0°03'(+16'/-28') | ||
+9.6° | -0°10'(+16'/-28') | ||
+8.6° | -0°16'(+16'/-28') | ||
+7.6° | -0°21'(+16'/-28') | ||
+6.6° | -0°26'(+16'/-28') | ||
+5.6° | -0°30'(+16'/-28') | ||
+4.6° | -0°33'(+16'/-28') | ||
+3.6° | -0°37'(+16'/-28') | ||
+2.6° | -0° 38' (+16'/-28') | ||
+1.6° | -0°40'(+16'/-28') | ||
BE40.20-P-1002-13F | Permissible difference in front axle camber between right and left sides of the vehicle | ° | 24' |
Check and adjustment values for caster
Number | Designation | Model | Model | ||
BE40.20-P-1001-20A | Permissible difference in caster between right and left sides of the vehicle | ° | 30' | 30' | |
BE40.20-P-1002-20A | Caster | See table | |||
Check and adjustment values for caster
Number | Designation | Model | ||
BE40.20-P-1001-20A | Permissible difference in caster between right and left sides of the vehicle | ° | 30' | |
BE40.20-P-1002-20A | Caster | See table | ||
Wheel location, hub
Number | Designation | Model 171 | Model 203 | |||
BA33.20-P-1006-01E | Self-locking nut for cross strut on front axle carrier | Stage 1 | Nm | 80 | 80 | |
Stage 2 | ° | 120 | 120 | |||
BA33.20-P-1007-01E | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | 80 | 80 | |
Stage 2 | ° | 120 | 120 | |||
BA33.20-P-1014-01E | Self-locking nut (repair kit) cross strut to front axle carrier | M1411510.9 | Stage 1 | Nm | 80 | - |
Stage 2 | ° | 120 | - | |||
M1412011.9 | Stage 1 | Nm | 100 | - | ||
Stage 2 | ° | 180 | - | |||
BA33.20-P-1015-01E | Self-locking nut (repair kit) strut rod to front axle carrier | M1411510.9 | Stage 1 | Nm | 80 | - |
Stage 2 | ° | 120 | - | |||
M1412011.9 | Stage 1 | Nm | 100 | - | ||
Stage 2 | ° | 180 | - | |||
Wheel location, hub