Put vehicle back into operation

AP00.00-B-0004A

16.07.2020

Model

364, 368, 382, 384, 634, 688, 979

1	Check for any difficulties when actuating engine start	 If difficulty in starting the engine is identified, do not insist on starting the engine. Otherwise, starting the engine with the battery at low voltage and insisting on starting it can cause irreparable damage to the components of the vehicle's electronic management system (modules) in addition to damage to the starter.
2	Remove all plastic covers	 Remove all air intake system protections, major assemblies and exhaust vents previously installed during vehicle standstill.
3	Check the brake discs and parking brake	.	AP42.20-B-4350D
		.	AP42.20-B-4350A
		 Ensure perfect cleaning of brake components, especially cleaning rusted parts such as discs and brake linings.
		 Remove the degreasing agent applied during standstill.
4	Clean plastic parts	 Clean the instrument cluster, steering wheel, and other plastic parts only with a soft, preferably dry cloth, if necessary moisten it with water.
		 Do not use any other cleaners or solvents as they may damage the paint on the panel coating, steering wheel, etc.
5	Replace the engine oil	Type 382, 634 with engine 457.9	AP18.00-B-0101N
		Vehicles 382.1 with engine 350.905	AP18.00-B-0101GAS
		Type 368, 634.0 with engine 906.9, 926.9. 979.2 with engine 924.9, 382.177/178/18, 384.2 with engine 924.9, 926.9 with Code MS5 (Euro V)	AP18.00-B-0101G
		Vehicles 382.155/189 with engine 936.9 with Code MS6 (Euro VI)	AP18.00-B-0101EVI
		Type 368.004/054/104/154 with engine 906.999T Type 368.150/154 with engine 926.950T Type 382.171/176 with engine 926.942	AP18.00-B-0101DD
		Vehicles 979.27 with engine 350.900	AP18.00-B-0101CUM
		Type 688.276 with engine 904.924	AP18.00-B-0101B
		Before the commissioning of the vehicle:
		
		Replace the engine conservation oil previously applied during vehicle standstill.
6	Reinstall the service belts and observe the conservation condition of the pulleys	Vehicles 382.155/189 with engine 936.9 with Code MS6 (Euro VI)	AP13.20-B-1350EVI
		Vehicles 382.1 with engine 350.905	AP13.20-B-1350C
		 Tension the V-belts of the engine.
		If the grooves of the pulleys oxidize or the belts dry out:
		
		Clean the pulleys and replace the dry belts.
7	Test the battery condition
		.	AR54.10-B-1129A
		 Reconnect the ground line of the battery (in vehicles with general key switch on the key) and perform the tests.
		If the battery is empty:
		
		Reload it.
		Model 368, 382, 384, 634, 688, 979	AR54.10-B-1130A
8	Check hydraulic steering for leaks and contamination	If leakage or contaminated hydraulic fluid is present:
		
		Replace.
			AR46.25-B-3300C
			AR46.25-B-3300XA
9	Check the additive A550 in the fuel	 The additive A550 in the fuel must be within 6 months.
		Check fuel reservoir impurities through the filter and, if necessary:
		
		Replace the fuel filter, the filter element of the pre-filter and vent.
10	Drain and fill the AdBlue® reservoir
11	Check the condition of the seal covers	Vehicles 368.0/1, 382.111/123, 384.06/07/201/223	AP46.00-B-4653B
		Vehicles 382.15/17/18, 634.0	AP46.00-B-4653A
		 Check the condition of the seal covers (of the axle connecting rods, axle steering bars and suspension rods).
12	Check the mechanism and steering terminals clearance.
13	Check the coolant level	Inspect the anti-corrosion/antifreeze concentration if it is below the specified:
		
		Replenish it.
		Vehicles 368, 382.1, 384.06/07/2/3, 634.0	AP20.00-B-2010XA
		Vehicle 979.270/272/276/277/278	AP20.00-B-2010LS
		Vehicles 384.061/067/069/076/078/223/311/333, 688.276/277	AP20.00-B-2010B
		Vehicles 382.155/189 with engine 936.9 with Code MS6 (Euro VI)	AP20.00-B-2010EVI
14	Check for impurities build-up in the air filter	.	AP09.10-B-0980E
			AP09.10-B-0951A
15	Check air dryer APU valve	If the air dryer cartridge is out of specification:
		
		Replace.
		Vehicles 688, 979	AP42.60-B-4381A
		Vehicles 364, 368, 382, 384, 634	AP42.60-B-4381C
16	Check the general condition of the tires	 Check the general condition of the tires and wheels for possible damages, deformation, dryness, oxidation, filling valves (including the tire of the spare wheel) as well as the expiration date of the tires.
		 Carry out the tire calibration with the recommended pressure in the tables in the Vehicle Operation Manual.
		If it is out of specification, or if it is malfunctioning:
		
		Make the necessary repair.
17	Check the operation of the clutch and check the fluid level of the clutch	Vehicle 979.2	AP25.20-B-2981F
		Vehicles 382.0/1, 634.0, 384.06/07/08/09	AP25.20-B-2981D
		Vehicle 688	AP25.20-B-2981B
18	Check the transmission oil level
19	Check operation and lubricate the air conditioning system	 Check that the air conditioning lubricating oil system is circulating. Failure to do so may result in damage to the compressor or other components.
		 Run the engine at idle and turn on the air conditioning system (if available) at minimum speed and temperature for a period of 10 minutes.
		 For details, refer to the air conditioner manufacturer's manual.

Odkazované dokumenty