Engine | 904 in model 693.103/171/185/186, 694.000/004/020/042 |
Engine | 904.9 in model 688.232/254/255 |
Engine | 904.924 in model 688.276 |
Engine | 904.925 in model 693.028 |
Engine | 906 in model 693.148/348/386/396, 695.010/011/304 |
Engine | 924 in model 694.000/042, 695.010/011/304 |
Engine | 924.985 in model 693.1 |
Engine | 926 in model 693.298/328/388, 695.010/011/304 |
B18.00-0001-01
Trucks | ||||
1 | Oil level dipstick | |||
2 | Oil supply nozzle | |||
B18.00-0005-01
B18.00-0029-01
1 | Oil level dipstick | |||
2 | Oil supply nozzle | |||
B18.00-0028-01
B18.00-0006-01
B18.20-0012-01
B18.00-0002-01
3 | Oil carter plug |
4 | Oil filter cover |
5 | Seal ring |
6 | Filter element |
C | Operation range |
D | Maximum Level |
E | Minimum Level |
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
1 | Tilt the cab | Except for Engines 904.925/965. | |
Warning | Risk of injury caused by pinching and crushing when opening and closing engine hood | No one should be within the swivel range of the engine hood as it is being opened or closed. Always open engine hood all the way to the end position until this engages in the front locks. | |
2 | Tilt the engine hood | Except for engine 904.925/965. | |
3 | Drain the lubricant oil through the draining plug (3)of the oil pain | Only drain the engine oil with warmed-up engine to the work temperature | |
Replace the draining plug sealing ring (3). | |||
Oil pan drain plug | |||
4 | Replace engine oil filter element (6) | ||
Oil filter cover to filter body | |||
5 | Fill crankcase through the filler neck (2) until the maximum oil level is reached on dipstick (1) | Engine oil | |
6 | Run the engine at idle speed observing the oil pressure indicator | Do not accelerate the engine until oil pressure is shown on the indicator. The pressure must be reestablished in approximately 10 seconds. | |
Do not crank the engine continuously for more than 30 seconds. If the engine does not fire within this interval, wait approximately 1 minute and crank it again. | |||
Test the oil filter and the crankcase oil drain plug sealing. | |||
Engine oil pressure, minimum permissible | |||
7 | Stop the engine | ||
8 | Control the lubricant oil level for 5 minutes after having stopped the engine | Under no hypothesis, the oil level must exceed the maximum reference level in the dipstick (1). | |
If necessary, reestablish the level, use oil of the same brand and type already existent, until reaching the maximum level. | |||
The oil level should be checked with the vehicle parked on level ground. |
Filling volume for engine lubrication |
Number | Designation | Engine 904.9 | Engine 906.9 | |||
BF18.00-B-1001-01B | Engine oil | Check the correct level | Oil pan | litros | 15,0 | 28 |
Filter | litros | 0,8 | 1,3 | |||
Maximum capacity after repair on the engine with drained oil channels | litros | - | - | |||
Oil class | MB 228.3, 228.5 | MB 228.3, 228.5 |
Filling volume for engine lubrication |
Number | Designation | Engine 924.9, | Engine 926.9 | |||
BF18.00-B-1001-01B | Engine oil | Check the correct level | Oil pan | litros | 15,0 | 28,0 |
Filter | litros | 0,8 | 1,3 | |||
Maximum capacity after repair on the engine with drained oil channels | litros | - | - | |||
Oil class | MB 228.3, MB 228.31, 228.5, MB 228.51 | MB 228.3, MB 228.31, 228.5, MB 228.51 |
Odkazované dokumenty
- ap1820b010004a
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče
- as8840z000101a Nebezpečí poranění svorkami a přiskřípnutím při otevírání a zavírání kapoty motoru