Remove/install detachable parts for replacing rear side wall paneling up to window cutout

AR60.00-D-0057TS

Remove/install detachable parts for replacing rear side wall paneling up to window cutout

29.05.2019

Model

907.6

with code W22 (Fixed window, center left)

with code W23 (Fixed window, center right)

Model

907.6

with code W24 (Sliding window center left)

with code W25 (Sliding window center right)

Model

907.6

with code W27 (Fixed window, rear left)

with code W28 (Fixed window at rear right)

Model

907.6

with code W34 (Sliding window rear left)

with code W35 (Sliding window rear right)

Model

907.7

Shown on model 907.733 with code T16 (right sliding door), right side of vehicle

Shown on model 907.7 with code W16 (front left window, fixed in the side wall/sliding door) with code W34 (rear left sliding window), with code V21 (Luxury interior trim), with code VK8 (plastic floor covering), and with passenger bench seat (8), left side of the vehicle

6

Front side wall trim

8

Passenger bench seat

11

D-pillar paneling

7

Rear side wall trim

9

Load compartment floor

Shown on model 907 with code P48 (Rear mud flap), left side of the vehicle

12

Dirt trap

13

Bolts

14

Nuts

Shown on model 907.6 except code W16 (front left window, fixed in side wall/sliding door) and except code W18 (front lh sliding window in side wall/sliding door) and except code W27 (rear left fixed window) and except code W34 (rear left sliding window) and except code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) and except code IR7 (wheelbase 4,325 mm, overhang 2,015 mm), left side of vehicle

16

Electrical wiring harness

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove respective protective strips.

AR88.80-D-1040TS

2

Remove respective rear lamp unit.

AR82.10-D-4731TS

3

Remove respective rear wheel.

AR40.10-D-1100TS

4

Remove respective mud flap (12).

Model 907.6/7 with code P48 (rear mud flap)

 For this purpose, remove screws (13) and remove nuts (14).

5

Remove respective bonded side window (17).

AR67.30-D-2400TS

6

Remove respective wheel well trim.

Model 907.6 with code V52 (loadable wheel well)

AR68.30-D-0016TS

7

Remove respective passenger bench seat (8).

Model 907.6/7 with passenger bench seat

AR91.21-D-4425TS

8

Remove respective side load compartment trim.

Model 907.6 with code V25 (load compartment trim up to belt rail, simple) or with code VA1 (load compartment trim up to belt rail, standard) or with code VA2 load compartment interior trim up to roof height (wood)) or with code VA3 (load compartment interior trim up to roof height, washable)

AR68.30-D-1185TS

9

Remove respective front side wall trim (6).

Model 907.6 with code V21 (Luxury interior trim), model 907.7

AR68.30-D-1209TSR

10

Remove respective center side wall trim.

Model 907.6 with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) with code V21 (luxury interior trim), model 907.6 with code IR7 (wheelbase 4,325 mm, overhang 2,015 mm) with code V21 (luxury interior trim), model 907.7 with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm), model 907.7 with code IR7 (wheelbase 4,325 mm, overhang 2,015 mm)

AR68.30-D-1211TSR

11

Remove respective rear side wall trim (7).

Model 907.6 with code V21 (Luxury interior trim), model 907.7

AR68.30-D-1208TSR

12

Remove respective cable duct of the electrical wiring harness (16).

Model 907.6/7 with code V94 (cable duct on side wall)

13

Remove respective electrical wiring harness (16) in the repair area and position outside of the working area.

14

Remove respective D-pillar trim (11).

AR68.30-D-4497TSR

15

Remove tie-down rail from side wall.

Model 907.6 with code V42 (side wall tie-down rails on belt rail)

AR68.50-D-8250TS

16

Remove load compartment floor (9).

Model 907.6 with code VK8 (plastic floor covering) except code V43 (wooden floor)

AR68.80-D-5800TSF

Model 907.6 with code V43 (wooden floor) except code VK8 (plastic floor covering)

AR68.80-D-5800TSR

17

Remove respective underfloor paneling.

If installed.

AR61.30-D-1001TS

18

Install in the reverse order.