Remove/install center side wall trim in passenger compartment

AR68.30-D-1211TSR

Remove/install center side wall trim in passenger compartment

13.06.2019

Model

907.6/7

with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)

Model

907.6/7

with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

Model

907.843/855

Modification notes

07.06.2019

New operation steps added.

Operation steps 1, 5.

Shown on model 907.7 with code EL9 (front and rear 2-way speaker system) on the center right side wall trim (1)

1

Center side wall trim

2

Retaining clips (18 pcs.)

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1.1

Remove passenger bench seat.

Model 907.843/855
If the center side wall trim (1) is removed to the left.

AR91.21-A-4425TSL

1.2

Remove passenger seats.

If the center side wall trim (1) is removed to the right.

Model 907.855
with code S16 (Passenger seats, luxury version)

AR91.21-A-4460TSL

2

Unclip center side wall trim (1) from the retaining clips (2) and remove from the side wall until the electrical connectors are accessible.

 The number of electrical connectors varies according to vehicle equipment.

 Model 907.843/855
Long wedge

*115589035900

 Model 907.6/7
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
Pulling hook

*655589076300

3

Disconnect electrical connectors and remove center side wall trim (1) from the side wall.

 The number of electrical connectors varies according to vehicle equipment.



Check

4

Check retaining clips (2).

If the retaining clips (2) are damaged



Replace damaged retaining clips (2).

5

Install in the reverse order.



Check

6

Perform function test of all component parts of the center side wall trim (1).