Remove/install side load compartment paneling

AR68.30-D-1185TS

Remove/install side load compartment paneling

20.12.2018

Model

907.6, 910.6

Shown with code D05 (super-high roof ) and with code VA3 (load compartment interior trim up to roof height, washable)

1

Load compartment trim

4

Retaining plate

2

Retaining plate

5

Expansion rivet

3

Screw

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove detachable parts near the corresponding load compartment trim (1).

2

Remove fasteners for the corresponding load compartment trim (1).

 The fasteners consist of the following component parts: Retaining plate (2) with screw (3), retaining plate (4) with screw (3), expansion rivet (5).
The number and position of fasteners may vary depending on the vehicle equipment.

 Clip remover

*452589016300

3

Remove load compartment trim (1).

 Model 907.6, 910.6
with code V42 (Sidewall tie-down rails on waist rail)
Model 907.6, 910.6
with code VC4 (Sidewall tie-down rails on roof frame)
Installation: Ensure that the load compartment trim (1) is seated correctly on the tie-down rail.

4

Install in the reverse order