ar0100s1201ef

Check compression pressure

Typ ar · temat 01.00 · wersja 0100 · 2014-12-18

Dotyczy: MODEL 447 with ENGINE 622

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 01 Silnik kompletny, odpowietrzenie silnika, głowica cylindrów, skrzynia korbowa › 01.00 Informacje ogólne — Seria 447 · Seria 622

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.15 Silnik spalinowy kompletny — Seria 447 · Seria 622

AR01.00-S-1201EF

Check compression pressure

03.12.2014

MODEL

447 with ENGINE 622

Check compression pressure

1

Compression pressure recorder

2

Adapter

3

Screw-in piece

P01.00-3162-03

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Remove

1

Bring engine up to operating temperature (approx. 80°C)

Only check compression pressure for an engine is at operating temperature.

2

Remove glow plugs

AR15.20-S-4111EF

3

Connect diagnostic system and call up control units menu

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-S-2000-04E

Select checking of the "compression pressure" in the menu. In this way one can ensure that no injection takes place when turning the engine.

4

Turn engine as per the menu sequence

Crank engine several times to eliminate combustion residues.

Install

5

Attach screw-in piece (3) with check valve installed into glow plug hole for cylinder to be checked

Screw-in fitting

*626589019100

6

Connect compression recorder (1) with flexible adapter (2) to the screw-in piece (3)

Compression tester

*001589762100

Check

7

Allow the engine to turn for a compression test

For checking the engine must be turned through at least 8 revolutions.

8

Carry out test procedure on remaining cylinders in the same way

9

Compare pressure readings obtained with test values

Installation tolerance or new value of compression pressure

*BE01.00-N-1001-04EF

Wear limit or limit value of compression pressure

*BE01.00-N-1002-04EF

Compression pressure, permissible difference between the cylinders

*BE01.00-N-1003-04EF

If pressure measured is less than minimum compression pressure or if permissible difference between individual cylinders is exceeded:

Check cylinders for leaks

AR01.00-S-1300EF

Remove

10

Remove compression pressure recorder (1) and screw-in piece (3)

11

Close off diagnostic system

Install

12

Install glow plugs

AR15.20-S-4111EF

Compression pressure

Number

Designation

ENGINE 622

BE01.00-N-1001-04EF

Installation tolerance or new value of compression pressure

bar

23...30

Compression pressure

Number

Designation

ENGINE 622

BE01.00-N-1002-04EF

Wear limit or limit value of compression pressure

bar

17

Compression pressure

Number

Designation

ENGINE 622

BE01.00-N-1003-04EF

Compression pressure, permissible difference between the cylinders

bar

3

Check compression pressure
Check compression pressure

626 589 01 91 00

Screw-in fitting

001 589 76 21 00

Compression tester

Powiązane dokumenty