Replace transmission

SM26.10-W-0002B

7.12.11

TRANSMISSION 715.570 in MODEL 970

TRANSMISSION 715.570 in MODEL 950.5, 952.6

W26.55-1037-06

1 Roll pin (only for vehicles with code (N55) Transmission cooling)

2 O-rings

3 Valve element (only for vehicles with code (N55) Transmission cooling)

4 Valve actuator (only with vehicles with code (N55) Transmission oil cooling)

5 Spring (short) (only with vehicles with code (N55) Transmission oil cooling)

6 Valve element

7 O-ring

8 Valve actuator

9 Spring (long)

10 Stop plug (only for vehicles without code (N55) Transmission oil cooling)

11 Shim

12 Oil pump housing

13 Driven oil pump gear

14 Driving oil pump gear

15 Oil pump end cover

16 O-ring

Arrows Markings

Operation no. of operation texts or standard texts and flat rates

Category	Op. no.	Operation text	Time	Acc. no.	Code
O	027780	OPERATION: REMOVE/INSTALL TRANSMISSION UPWARDS (ONLY MODEL 950.5, 952.6)	5,0h	26 960 72	GETRIEBE97
O	027781	OPERATION: REMOVE/INSTALL TRANSMISSION DOWNWARDS (ONLY MODEL 950.5, 952.6)	6,3h	26 960 72	GETRIEBE97
O	027781	OPERATION: REMOVE/INSTALL TRANSMISSION DOWNWARDS (ONLY MODEL 970)	5,5h	26 960 72	GETRIEBE97
O	027782	OPERATION: VENT HYDRAULIC PNEUMATIC POWER SHIFT	0.8 h	26 960 72	GETRIEBE97
O	027783	OPERATION: EXTRA WORK FOR REMOVAL/INSTALLATION OF TRANSMISSION. VEHICLE WITH TRANSMISSION OIL COOLING	0.3 h	26 960 72	GETRIEBE97
O	027784	OPERATION: EXTRA WORK FOR: REMOVAL/INSTALLATION OF TRANSMISSION ON VEHICLES WITH POWER TAKE-OFF (ONLY MODEL 950.5, 952.6)	Time prescribed by foreperson	26 960 72	GETRIEBE97
O	027785	OPERATION: CONVERT TRANSMISSION OUTPUT FLANGE (TRANSMISSION REMOVED)	0,4h	26 960 72	GETRIEBE97

	Removing
1	Drain and collect transmission oil		AP26.00-W-2601A
2	Remove transmission	Remove transmission downwards in model 950, 952	AR26.10-W-0022D
		Remove transmission downwards in model 970	AR26.10-W-0022E
		Remove transmission upwards in model 950, 952	AR26.10-W-0023D
		 With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system.
3	Remove transmission output flange	 Only for transmission with SAA 504176/23	AR26.40-W-0007D
4	Detach PTO from transmission	 Only for transmission with PTO
		With code (ND3) Power take-off MB 124-10c, MPA, N-/M speed	AR26.45-W-0001A
		With code (NH2) Power take-off countershaft MB 131-2c	AR26.45-W-0001D
5	Remove oil pump end cover (15)	 Only for transmission with PTO
6	Remove valve element (3), valve actuator (4), spring (5) and valve element (6)	 Only on transmission with code (N55) Transmission oil cooling.
	Install
7	Install valve element (3), valve actuator (4), spring (5) and valve element (6) into new transmission	 Only on transmission with code (N55) Transmission oil cooling.
8	Install cap for oil pump (15) into new transmission	 Only for transmission with PTO	AR26.55-W-3000A
9	Install power take-off onto new transmission	 Only for transmission with PTO
		With code (ND3) Power take-off MB 124-10c, MPA, N-/M speed	AR26.45-W-0001A
		With code (NH2) Power take-off countershaft MB 131-2c	AR26.45-W-0001D
10	Install transmission output flange	 Only for transmission with SAA 504176/23	AR26.40-W-0007D
11	Install new transmission	Install transmission from below into model 950, 952	AR26.10-W-0022D
		Install transmission from below into model 970	AR26.10-W-0022E
		Install transmission from above into model 950, 952	AR26.10-W-0023D
12	Pour in transmission oil and correct transmission oil level		AP26.00-W-2601A
13	Bleeding air from hydraulic-pneumatic shift-control mechanism (HPS)	Model 950, 952	AR26.60-W-7200B
		Model 970	AR26.60-W-7200C

Parts ordering notes

Part no.	Designation	Quantity
	Determine major assembly from VeDoc or order by quoting the VIN or major assembly number.	1

เอกสารที่อ้างถึง