Shown on transmission 715.500 with power take-off PTO 131-2b |
1 | Power take-off |
2 | Bolt |
3 | Drive shaft |
W26.45-1333-05
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Notes on compressed air connection systems | ||
| Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Drain and collect transmission oil | ||
| Transmission 715.350/370/380/500/507/510/513/515/525/540/561 Transmission 715.520 without code G02 (Torque converter clutch (WSK)) Transmission 715.570 except in model 949 | ||
| Transmission 715.520 with code G02 (Torque converter clutch (WSK)) | ||
| Transmission 715.570 in model 949 | ||
2 | Unpressurized circuit 4 of compressed-air system | ||
3.1 | Detach hydraulic pump from power take-off (1) and place to one side | Power takeoff with hydraulic pump | |
Do not detach hydraulic lines. | |||
Nut, hydraulic pump to power take-off | |||
3.2 | Remove drive shaft from power take-off (1) and place to one side | Power takeoff without hydraulic pump | |
Propeller shaft to power take-off | |||
4 | Disconnect electrical connections | ||
5 | Detach compressed air line from shift cylinder | ||
6 | Remove power take-off (1) | Installation: Clean sealing surfaces and coat with sealant. | |
Screw/bolt, PTO to transmission | |||
Loctite 5203 sealant | |||
7 | Check shift teeth of drive shaft (3) for wear and damage | Puller, two-arm | |
Turning device | |||
If wear or damage is present: | |||
| |||
Replace drive shaft (3). | |||
8 | Install in the reverse order |
904 589 04 63 00
Turning device
000 589 88 33 00
Puller, two-arm