AP47.20-W-0780B | Replace fuel filter | 5.4.11 |
ENGINE 900.9 in MODEL 375.1, 970, 972, 975, 976
ENGINE 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINE 902.9, 906.9 in MODEL 957.5 /6 except CODE (MS8) Natural gas engine
ENGINE 902.9 in MODEL 375.15, 970, 972, 974, 975, 976
ENGINE 904.9 in MODEL 673, 674, 676
ENGINE 904.9 in MODEL 375.1, 970, 972, 975, 976
ENGINE 906.9 in MODEL 374.5, 375.3, 950, 952, 953, 954
ENGINE 906.9 in MODEL 970, 972, 974, 975, 976
ENGINE 924.9 in MODEL 970, 972, 974, 975, 976
ENGINE 925.9 in MODEL 970, 972, 974
ENGINE 926.9 in MODEL 950, 952, 953, 954, 957.38 /5 /6
N07.57-0226-01
1 Threaded cap
2 Sealing ring
3 Filter element
4 Dirt collecting tank
5 Fuel filter housing
N07.57-0225-01
| Removing | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
1 | Open tank cap on fuel tank | To release excess pressure in fuel tank. | |
2 | Detach transverse switch tube | Only on right-hand drive vehicles | |
3 | Remove threaded cap (1) from fuel filter housing (5) | Remove the screw cap (1) with the filter element (3) only after the fuel has drained out of the fuel filter housing (5). | |
Wrench socket gotis://G_58.3_06.0 | |||
4 | Remove threaded cap (1) with cleaner element (3) and unclip cleaner element (3) by pressing at side | Ensure that no foreign bodies get into the fuel filter housing (5) Under no circumstances rinse out the fuel filter housing (5). | |
5 | Pull out the dirt collecting tank (4) at the fishplate from the fuel filter housing (5) | Ensure that the deposited dirt does not enter the fuel filter housing (5), do not empty the dirt collecting bowl (4) in the fuel filter housing (5) and never rinse out the fuel filter housing (5). Otherwise, there can be damage to the fuel system. | |
6 | Clean screw cap (1) and dirt collecting bowl (4) | ||
| Install | ||
7 | Replace seal (2) | Grease sealing ring (2) slightly. | |
8 | Insert new filter element (3) into the screw cap (1) | ||
9 | Insert the dirt collecting tank (4) into the fuel filter housing (5) | Install components in correct positions. | |
10 | Screw on screw cap (1) with filter element (3) and tighten | | |
Wrench socket gotis://G_58.3_06.0 | |||
11 | Fit on transverse shift tube | Only on right-hand drive vehicles | |
| |||
| |||
12 | Close tank cap on fuel tank | ||
13 | Start the engine and bleed the fuel system | Run the engine for approx. 1 minute. The fuel system is bled automatically. | |
14 | Check the fuel filter housing (5) for leaks when the engine is running | ||
15 | Turn off engine |
Shift mechanism
Number | Designation | Model 970, 972, 974, 975, 976 RHD with ENGINE 902, 906 | |
BA26.60-N-1001-01H | Transverse shift tube support to engine | Nm | 40 |
BA26.60-N-1002-01H | Gearshift boot support to transverse shift tube | Nm | 25 |
Fuel filter
Number | Designation | Engine | Engine | |
BA47.20-N-1001-02A | Cover on fuel filter housing | Nm | 25 | 25 |
Fuel filter