ar3530d467003b

Install joint flange at drive pinion

Vrsta ar · tema 35.30 · različica 0114 · 2018-06-07

Velja za: Rear axle 741.130 in model 690.4, 904 Rear axle 741.130/408/409 in model 690.6 Rear axle 741.131/412/413/414/415/416/420/43/52/530/540/55 Rear axle 741.400/401/404/405/406/407 Rear axle 741.428 in model 8AC906.133/631/633/635 with code ZL3 (National version for Latin America) Rear axle 741.429 in model 8AC906.153/155/655/657 with code ZL3 (National version for Latin America)

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi — Serija 690 (modeli 4**, 6**) · Serija 904 · Serija 906 (modeli 133, 153, 155, 631, 633, 635, 655, 657)

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.65 gonilo zadnje preme/medosno gonilo — Serija 690 (modeli 4**, 6**) · Serija 904 · Serija 906 (modeli 133, 153, 155, 631, 633, 635, 655, 657)

Velja tudi za motorje/menjalnike: 741 130, 741 131, 741 400, 741 401, 741 404, 741 405, 741 406, 741 407, 741 408, 741 409, 741 412, 741 413, 741 414, 741 415, 741 416, 741 420, 741 428, 741 429, 741 43*, 741 52*, 741 530, 741 540, 741 55*

AR35.30-D-4670-03B

Install joint flange at drive pinion

Rear axle

741.130 in model 690.4, 904

Rear axle

741.130/408/409 in model 690.6

Rear axle

741.131/412/413/414/415/416/420/43/52/530/540/55

Rear axle

741.400/401/404/405/406/407

Rear axle

741.428 in model 8AC906.133/631/633/635

with code ZL3 (National version for Latin America)

Rear axle

741.429 in model 8AC906.153/155/655/657

with code ZL3 (National version for Latin America)

Test and adjustment values for rear axle drive

Number

Designation

Rear axle 741.40/43

Rear axle 741.1

BE35.30-N-1001-01B

Friction torque of drive pinion bearing

with radial shaft sealing ring

Nm

2,5...3

2,5...3

without radial shaft sealing ring

Nm

1,65...3,74

1,65...3,74

Test and adjustment values for rear axle drive

Number

Designation

Rear axle 741.412/413/414/416/420/428/429

Rear axle 741.415

BE35.30-N-1001-01B

Friction torque of drive pinion bearing

with radial shaft sealing ring

Nm

4,1...4,5

4,1...4,5

without radial shaft sealing ring

Nm

1,65...3,74

1,65...3,74

Test and adjustment values for rear axle drive

Number

Designation

Rear axle 741.52/53/54/55
Rear axle 741.5

BE35.30-N-1001-01B

Friction torque of drive pinion bearing

with radial shaft sealing ring

Nm

2,5...3

without radial shaft sealing ring

Nm

1,65...3,74

Install joint flange at drive pinion
Install joint flange at drive pinion

001 589 49 21 00

Torque meter

717 589 00 31 00

Retainer wrench

Install joint flange at drive pinion

1

Fit coupling flange on drive pinion.


If present the groove on the drive pinion and groove on the joint flange must match.



2

Mount bracket (01) to joint flange.


Shown on rear axle 741.408

D35.25-0005-01

Install joint flange at drive pinion

3

Screw on new collar nut and tighten carefully in stages until the specified total friction moment (friction torque) is reached.



4

Detach retainer wrench (01) from joint flange.



5

With the Use torque meter (02) to check total friction moment on drive pinion.



6

Tighten the collar nut carefully in stages until the specified total friction moment is reached.
Check total friction moment after each retightening using torque meter (02).


Never correct total friction coefficient by slackening collar nut. Avoid tightening the collar nut too tightly.
As otherwise the inner compressed ring will be pushed together and then it always has to be replaced. This entails complete dismantling of the gear set


D35.25-0006-01