N27.10-2026-09
1 | Oil pan | 4 | Overflow pipe | 7 | Torque converter drain plug | ||
2 | Screw | 5 | Oil filter | 8 | Torque converter | ||
3 | Seal | 6 | Sprag | 10 | Drift |
4 | Overflow pipe |
9 | Permanent magnet |
N27.10-2024-02
Drain oil | |||
Warning | Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid. | Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Notes on automatic transmission | |||
1 | Lift/jack up vehicle | Only when a pit is not available. | |
| |||
2 | Secure vehicle on vehicle lift | ||
| |||
3 | Clean area around torque converter drain screw (7) and oil pan (1) | ||
4 | Position suitable receptacle under the transmission | ||
5 | Remove drain screw from oil pan (1) | Collect oil which flows out in a suitable vessel. | |
6 | Pry overflow pipe (4) off base (arrow) using drift (10) | Collect oil which flows out in a suitable vessel. | |
Drift | |||
7 | Remove auxiliary oil pump | ||
| With CODE MJ8 (ECO start/stop function) or with CODE MJ7 (ECO start/stop function) | ||
8 | Drain transmission oil from torque converter (8) | ||
| |||
Drain screw to torque converter | |||
Counterholder | |||
Counterholder | |||
Ratchet box wrench | |||
Drain plate | |||
9 | Remove oil pan (1) | ||
10 | Detach oil filter (5) downwards | ||
11 | Remove overflow pipe (4) from oil pan (1) | ||
| Clean | ||
12 | Clean permanent magnets (9) and check for damage | Replace permanent magnet (9) if necessary. | |
13 | Clean oil pan (1) | | |
The sealing surfaces on the oil pan (1) and transmission housing must be free of oil and grease. | |||
Install | |||
14 | Install new oil filter (5) with new O-ring | ||
15 | Install new overflow pipe (4) | Press new overflow pipe (4) firmly onto the base (arrow) in the oil pan (1). The overflow pipe (4) must latch noticeably. | |
16 | Install oil pan (1) with new seal (3) | | |
Replace seal (3) and bolts (2). | |||
Do not apply sealant on oil pan (1) and transmission housing. | |||
Bolt, oil pan to transmission housing | |||
17 | Install drain screw in oil pan (1) | Drain screw on oil pan | |
18 | Install auxiliary oil pump | ||
| With CODE MJ8 (ECO start/stop function) or with CODE MJ7 (ECO start/stop function) | ||
Pour in oil | |||
19.1 | Fill automatic transmission with transmission oil. | Transmission with guide tube for oil dipstick | |
Automatic transmission fluid ATF | |||
Funnel | |||
Hand pump | |||
Dipstick | |||
19.2 | Fill automatic transmission with transmission oil. | Transmission without guide tube for oil dipstick | |
| |||
20 | Confirm oil change in maintenance booklet/DSB |
Automatic transmission |
Number | Designation | Transmission 722.9 | |||
BF27.00-N-1001-01A | Automatic transmission fluid ATF | Filling capacity - complete refill | Liter | 10,0 | |
Filling capacity - oil change | Liter | 9,0 | |||
Filling capacity, transmission oil change | with torque converter | Liter | 9,0 | ||
Filling capacity, transmission oil change | without torque converter | Liter | 5,5 | ||
Sheet | |||||
Sheet | - | ||||
Sheet | - | ||||
Sheet | - | ||||
Sheet | - | ||||
126 589 12 63 00
Funnel
210 589 00 71 00
Hand pump
906 589 08 63 00
Drain plate
722 589 00 21 00
Dipstick
722 589 03 15 00
Drift
651 589 00 40 00
Counterholder
651 589 08 40 00
Counterholder
906 589 00 03 00
Ratchet box wrench