ar2700d0270we

Fill automatic transmission with transmission oil

Vrsta ar · tema 27.00 · različica 0104 · 2019-07-19

Velja za: Transmission 722.9 in model 906 Transmission without guide tube for oil dipstick

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 27 Samodejni menjalnik › 27.00 Splošno — Serija 906

EinPAS 17 pogonski sklop/prema › 17.20 menjalnik › 17.20.80 menjalnik, celoten — Serija 906

Velja tudi za motorje/menjalnike: 722 9**

AR27.00-D-0270WE

Fill automatic transmission with transmission oil

18.07.2019

Transmission

722.9 in model 906

Transmission without guide tube for oil dipstick

Fill automatic transmission with transmission oil

2

Adapter

D27.00-1114-01

Fill automatic transmission with transmission oil

Check of trailing oil jet

3

Drain screw

P27.00-2330-05

Warning

Risk of burns and scalding when handling hot fluids and components they come into contact with. Risk of injury to skin and eyes when handling hot fluids.

Wear protective gloves, protective clothing and safety glasses, if necessary. Pour hot fluids in suitable containers only.

AS00.00-Z-0033-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Notes on automatic transmission

AH27.19-P-0001-01NKB

Fill with transmission oil

1

Raise vehicle.

AR00.60-D-1000H


Raise the vehicle aligned horizontally in the longitudinal and transverse direction.
Otherwise measurement errors can occur which can result in malfunctions and transmission damage.

2

Remove drain screw (3).

3

Screw in adapter (2) and connect oil dispenser.

000 588 06 82 00 Oil dispenser

WS18.00-P-0026B

4

Pump transmission oil into automatic transmission.

Automatic transmission fluids (ATF) (specification 236.15)

BB00.40-P-0236-15A


Observe the Specifications for Operating Fluids and use only approved transmission oils.
Otherwise malfunctions and transmission damage can occur.

If automatic transmission has been repaired:

Pour in quantity of transmission oil drained previously plus an additional 0.5 l of transmission oil.

If automatic transmission has not been repaired:

Pour in 6 l of transmission oil.

5

Start engine.

6

Connect vehicle diagnosis system and check transmission oil temperature.

AD00.00-D-2000-04SD


The transmission oil level should only be checked at a transmission oil temperature of 45 °C (113 °F). It is essential to observe all of the transmission oil temperatures specified below.
Otherwise malfunctions and transmission damage can occur.

7

Heat up transmission oil to 90 °C (194 °F).

After opening oil circuit.

Leave the automatic transmission at selector lever position "P" and keep the engine speed at 2500 rpm.

The thermostat of the automatic transmission oil cooler opens at 90 °C (194 °F), and the automatic transmission oil cooler is filled and bled.

8

Allow transmission oil to heat up or cool down to 45 °C (113 °F).

If transmission oil temperature is too low:

Leave the automatic transmission at selector lever position "P" and keep the engine speed at 2500 rpm.

If transmission oil temperature is too high:

Switch off engine.

9

Check transmission oil temperature with engine switched off.

The transmission oil temperature must be 45 °C (113 °F).

If transmission oil temperature is not 45 °C (113 °F):

Allow transmission oil to heat up or cool down.

10

Start engine.

Leave the automatic transmission at selector lever position "P" and the engine running at idle speed.

Correct transmission oil level

11

Pump transmission oil into automatic transmission.

Automatic transmission fluids (ATF) (specification 236.15)

BB00.40-P-0236-15A


Observe the Specifications for Operating Fluids and use only approved transmission oils.
Otherwise malfunctions and transmission damage can occur.

If automatic transmission and torque converter have been replaced:

Pour in 4 l of transmission oil.

If the torque converter has not been emptied,

Pour in 2 l of transmission oil.

12

Shift through all selector lever positions several times.

Apply the service brake, leave the engine running at idle speed and slowly shift through the selector lever positions several times: "P"  "R"  "N"  "D"  "N"  "R"  "P".

13

Engage selector lever position "P".

Leave the engine running at idle speed.

14

Check transmission oil temperature using vehicle diagnosis system.

The transmission oil temperature must be 45 °C (113 °F).

If transmission oil temperature is not 45 °C (113 °F):

Allow transmission oil to heat up or cool down.

15

Remove adapter (2).

000 588 06 82 00 Oil dispenser

WS18.00-P-0026B

16

Allow constant stream of oil (arrow a) to drain until only a trickling stream of oil (arrow b) escapes.


Leave the engine running at idle speed and do not exceed the transmission oil temperature.
Otherwise too much transmission oil will be drained off, and malfunctions and transmission damage can occur.

If the oil jet (arrow a) initially discharged is not constant, but rather a trickling oil jet (arrow b):

Repeat procedure starting with operation step 11.

17

Screw in drain screw (3).

Replace seal.

Drain screw on oil pan

*BA27.10-N-1005-04B

18

Switch off engine.

19

Lower vehicle.

20

Disconnect diagnostic system.

AD00.00-D-2000-04SD

Complete automatic transmission

Number

Designation

Transmission 722.9

BA27.10-N-1005-04B

Drain screw on oil pan

Nm

22

Povezani dokumenti