P15.12-2243-09
Shown on engine without code M016 (performance-enhanced engine) |
1 | Electrical connector | T1/1 | Cylinder 1 ignition coil | T1/3 | Cylinder 3 ignition coil | ||
2 | Bolts | T1/2 | Cylinder 2 ignition coil | T1/4 | Cylinder 4 ignition coil |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Notes on avoiding damage to ignition system | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove engine air intake duct downstream of air filter. | ||
2 | Remove charge air pipe downstream of exhaust gas turbocharger. |
| |
3 | Release and disconnect the electrical connections (1). | ||
4 | Remove screws (2). | Screw/bolt, ignition coil to cylinder head cover | |
5 | Remove the ignition coils (T1/1, T1/2, T1/3, T1/4) together with the spark plug connectors. | Installation: | |
Spark plug connector grease | |||
6 | Check the ignition coils (T1/1, T1/2, T1/3, T1/4) and spark plug connectors for damage. | If there are problems, | |
| |||
Replace corresponding components. | |||
7 | Install in the reverse order. | ||
8 | Read out and delete fault memory. | ||
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Conduct engine test run while checking for proper operation of the engine. |
Documente menționate
- ad0000p200006mfa
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah1510p000201v Indicaţii pentru evitarea producerii de avarii la instalaţia de aprindere
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar0910p8130mfc
- ar0941p1333mfc
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)