Remove/install high-pressure line to fuel injector

AR07.16-D-1003TSV

Remove/install high-pressure line to fuel injector

18.04.2019

Engine

642 in model 907

1

Leak oil line

3

Screw

2

Bracket

4

High pressure pipe

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Notes about Common-Rail components

AH07.16-P-0002-01TX

 

Remove/install

1

Remove trim of respective cylinder head cover.

AR01.20-D-5017TSV

AR01.20-D-5018TSV

2

Remove leak oil line (1) from fuel injector and place outside working area.

AR07.03-D-9110TSV

3

Remove holder (2).

 If high-pressure line (4) of cylinder 6 is removed.

Firing order

AH01.00-N-0100-02P

 To do this, remove screws/bolts (3).

 Screw/bolt, rail to cylinder head

*BA07.16-N-1012-03TSV

4

Remove high-pressure line (4).

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

 Installation:
Slightly screw union nuts of high-pressure line (4) by hand onto fuel injector and rail. Then tighten to torque and tightening angle.
Tension can otherwise arise at high-pressure line (4).

 Seal connections at fuel injector and rail.

 Installation: Check sealing cones of high-pressure line (4) for damage.

 Union nut, high-pressure line for fuel injector to fuel injector

*BA07.16-N-1005-03TSV

 Union nut, high-pressure line for fuel injector to rail

*BA07.16-N-1006-03TSV

 Open wrench insert, (18 mm)

*000589300100

 Box wrench bit

*000589680300

 Record plug

*129589009100

Depending on the findings,



replace high-pressure line(4).

5

Install in the reverse order.



Check

 Danger

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.
Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check leak tightness in visible area when the engine is running.

 Visual inspection only.

 Common Rail diesel injection system

Number

Designation

Engine 642 in model 907

BA07.16-N-1005-03TSV

Union nut, high-pressure line for fuel injector to fuel injector

Stage 1

Nm

20

Stage 2

°

60

 Common Rail diesel injection system

Number

Designation

Engine 642 in model 907

BA07.16-N-1006-03TSV

Union nut, high-pressure line for fuel injector to rail

Stage 1

Nm

20

Stage 2

°

60

 Common Rail diesel injection system

Number

Designation

Engine 642 in model 907

BA07.16-N-1012-03TSV

Screw/bolt, rail to cylinder head

Nm

14