ar2700d0100a

Checking oil level in automatic transmission and correcting if necessary

유형 ar · 주제 27.00 · 버전 0106 · 1999-10-01

적용 대상: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 27 자동변속기 › 27.00 서문 — 시리즈 601 (모델 943) · 시리즈 602 (모델 980) · 시리즈 901 (모델 06*, 3**, 4**) · 시리즈 902 (모델 0**, 3**, 4**) · 시리즈 903 (모델 0**, 3**, 312, 362, 4**, 462, 463) · 시리즈 904 (모델 0**, 4**)

EinPAS 17 드라이브 트레인/액슬 › 17.20 변속기 › 17.20.80 변속기 전체 — 시리즈 601 (모델 943) · 시리즈 602 (모델 980) · 시리즈 901 (모델 06*, 3**, 4**) · 시리즈 902 (모델 0**, 3**, 4**) · 시리즈 903 (모델 0**, 3**, 312, 362, 4**, 462, 463) · 시리즈 904 (모델 0**, 4**)

엔진/변속기에도 적용: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376

AR27.00-D-0100A

Checking oil level in automatic transmission and correcting if necessary

10.4.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) FedEx supply

Checking oil level in automatic transmission and correcting if necessary
Checking oil level in automatic transmission and correcting if necessary

P27.00-0204-01

P27.00-0201-01

Figure 1, left

6 Oil dipstick

6a Locking lever

6b Locking pin

Figure 2, right

Min/max markings on oil dipstick

Checking

Position vehicle horizontally for oil level inspection.

1

Check transmission for leaks before oil level inspection.

If there is a large loss of oil determine cause and rectify.

Danger!

Risk of accident due to vehicle starting off automatically when engine is running. Risk of injury due to being trapped and burns when intervening during the starting operation or when the engine is running

Secure vehicle to prevent it from starting off automatically.
Wear close-fitting, tight clothing.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

2

Allow engine to idle in selector lever position "P".

3

Press the locking pin (6b) away to the side in the direction of the arrow, remove both parts and open locking lever (6a).

(Figure 1)

4

Pull out oil dipstick (6).

Wipe with a fluff-free cloth.

5

Insert oil dipstick (6) as far as the stop, pull out again and read off oil level.

When the transmission is cold (transmission oil temperature approx. 30°C), the display must be between the "min." and "max." marking when the oil level is correct (Figure 2).
When the transmission is at operating temperature (transmission oil temperature approx80°C), the display must be on the "max." marking when the oil level is correct (Figure 2).

Correcting

6

Pour in transmission oil when the engine is running.

*126589126300

It is absolutely essential to drain or draw off excess transmission oil,

An insufficient and excessive amount of oil impairs the function of the transmission.
Automatic transmission oil in accordance with the Specifications for Service Products, Sheet 236.4/6/7

*210589007100

7

Check oil level again.

Correct, if necessary

8

Close locking lever (6a) and insert locking pin (6b) until it locks in position.

(Figure 1)
Insert oil dipstick (6) so that the locking clip (6a) is easily accessible and does not touch anything.

Checking oil level in automatic transmission and correcting if necessary
Checking oil level in automatic transmission and correcting if necessary

126 589 12 63 00

210 589 00 71 00

Hand pump

Funnel

참조 문서