AP47.20-D-0780B | Replace fuel filter | 8.12.09 |
ENGINE 601.942 /970 in MODEL 638
ENGINE 601.943, 602.980 in MODEL 901, 902, 903, 904
ENGINE 602.984 /985 in MODEL 667, 668, 670
N07.57-0210-01
N07.57-2172-01
Shown on models 638, 901, 902, 903, 904
Shown on models 667, 668, 670
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns when working in engine during starting procedure | Secure vehicle to prevent it from moving. | |
1 | Unscrew bolt (2) and remove the filter cartridge (1) | Empty filter cartridge (1) and if necessary, empty fuel/water separator. | |
2 | Replace seal (3) | Grease sealing ring (3) slightly. | |
3 | Insert new filter cartridge (1) in filter head and screw tight | To do this, screw in bolt (2). | |
| |||
4 | Start engine | Bleed fuel filter, to do this, allow engine to run for 1 minute at approx. 1,500 rpm. The fuel filter is bled automatically. | |
If the engine stops or does not start, crank engine with the starter until it runs properly. | |||
| Check | ||
5 | Run engine and inspect filter for leaks |
Fuel filter
참조 문서
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험