gf8261p2003b

Navigation, function

Type gf · topic 82.61 · version 0101 · 1998-12-16

Applies to: MODEL 129, 140 as of 1.1.98, 168, 202, 208, 210.2, 210.0 as of 1.1.98 with CODE (351) Auto-pilot system (APS) MODEL 129, 140 as of 1.1.98, 202, 208, 210.2, 210.0 as of 1.1.98 with CODE (815) Dynamic APS

Where it sits

Function group 3 Body › 82 Electrical system, body › 82.61 Auto Pilot System (APS), Audio 30 APS — Series 129 · Series 140 · Series 168 · Series 202 · Series 208 · Series 210 (models 0**, 2**)

GF82.61-P-2003B

Navigation, function

19.2.97

MODEL 129,
140 as of 1.1.98,
168, 202, 208, 210.2,
210.0 as of 1.1.98 with CODE (351) Auto-pilot system (APS)

MODEL 129,
140 as of 1.1.98,
202, 208, 210.2,
210.0 as of 1.1.98 with CODE (815) Dynamic APS

Navigation is determination of the position of the vehicle, determination of the direction and distance to the destination (after entry of a destination) and accomplishment of measures required to reach this destination. Navigation therefore includes the following terms:

Location finding route calculation destination guidance

Location finding
The location of the vehicle is calculated continuously by the auto-pilot system (APS) with the aid of the following procedures:

GPS location finding

Basic location finding (dead reckoning)

Map-assisted location finding (map matching)


These three procedures are compared with one another by the navigation processor (A2/30).

Route calculation
The route is calculated by the navigation processor (A2/30) after entry of the destination or automatically upon deviating from the recommended route. After calculation the route is stored in the RAM in the navigation processor (A2/30).


With dynamic guidance (only with code 815) the current traffic situation (construction sites, traffic jams, ...) are also taken into consideration in calculating the route.

Entering destination
The destination can be entered on the radio and navigation operating unit (A2/29) and is processed by the navigation processor (A2/30). Only destinations can be entered which are listed on the CD-ROM.
The data read in from the CD-ROM map is indicated on the display of the operating unit. The destination entered is stored.

Guidance
After entering the destination of the radio and navigation operating unit (A2/29) and calculation of the route by the navigation processor (A2/30) guidance is started. Upon leaving the recommended route a new route is automatically calculated or the voice prompt "Please turn around if possible" is output.

Outside of the digitalized network of roads guidance is accomplished only via direct route indicating the distance to the destination.

Outside of the CD-ROM map boundaries complete navigation is not available. The message "NO MAP" appears on the display.

Continuous location finding, function

GF82.61-P-2002B

Route calculation, function

GF82.61-P-3011C

Destination guidance, function

GF82.61-P-3012A

Auto-pilot system navigation processor, location/purpose/design/function

GF82.61-P-4104A

Radio and navigation operating unit, location/purpose/design/function

GF82.61-P-4100B

Referenced documents