ar0100p1200ts

Test compression pressure

Type ar · topic 01.00 · version 0103 · 2006-04-26

Applies to: ENGINE 272, 273 in MODELS 211, 219

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.00 General — Series 211 · Series 219

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.15 internal combustion engine, complete — Series 211 · Series 219

Also applies to engines/gearboxes: 272 ***, 273 ***

AR01.00-P-1200TS

Test compression pressure

12.4.06

ENGINE 272, 273 in MODELS 211, 219

Test compression pressure

P01.00-2451-12

01 Compression recorder

Remove/install

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

1

Bring engine to operating temperature (approx. 80°C)

Only test compression pressure when engine is at normal operating temperature.

2

Remove key from the ignition lock

3

Remove air filter housing

AR09.10-P-1150TS

4

Remove ignition coils

AR15.12-P-2003TS

5

Remove spark plugs

Replace spark plugs

Model 211

AP15.10-P-1580TS

Model 219

AP15.10-P-1580TX

6

Attach electrical feed lines on compression recorder (01) and crank engine with contact switch at compression recorder

Crank engine for about 5 seconds to remove combustion residue from cylinders.

AR01.10-P-0110TS

*001589762100

*220589009900

Checking

7

Press the compression tester (01) on the tapped bore of spark plug of first cylinder

The sealing cone of the compression tester must airproof tapped bore of spark plug.

8

Crank engine with contact switch of compression tester (01) until the increase in pressure is no longer indicated on compression tester

9

Carry out the testing procedure in the cylinder order on the remaining cylinders in the same way

10

Compare measurements obtained with the specified pressures

Compression installation tolerance or new value

*BE01.00-P-1001-01B

Compression pressure permissible difference between individual cylinders

*BE01.00-P-1002-01B

Compression pressure wear limit or limit value

*BE01.00-P-1003-01B

If the pressure measured is less than the minimum compression pressure or if the permissible difference between the individual cylinders is exceeded:

Inspect cylinders for leaks.

AR01.00-P-1300TS

11

Install in the reverse order

Compression pressure

Number

Designation

Engine
272

Engine
273

BE01.00-P-1001-01B

Compression installation tolerance or new value

bar

12 - 15

12 - 16

BE01.00-P-1002-01B

Compression pressure permissible difference between individual cylinders

bar

1,5

1,5

BE01.00-P-1003-01B

Compression pressure wear limit or limit value

bar

10

10

Test compression pressure
Test compression pressure

220 589 00 99 00

Electrical connection kit

Compression recorder

001 589 76 21 00

Referenced documents