Partially remove/install detachable parts on entrance for replacing longitudinal member

AR60.00-S-0022PA

Partially remove/install detachable parts on entrance for replacing longitudinal member

15.04.2019

Model

470, 471

Front right area

Modification notes

15.04.2019

Method extended

Operation step 7

Shown on model 470 with code EC1 (eCALL Russia (ERA-GLONASS))

4

Bracket

5

Bolts

6

ISOFIX child seat attachment

7

Bolts

8

Seat belt retractor bracket

9

Cover

10

Bracket

Possible cuts for repair variants, shown on left side of vehicle

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove edge guard for door cutout of front door.

2

Remove lower C-pillar trim.

AR68.30-S-4494P

3

Remove front door.

AR72.10-S-0500P

4

Remove lower front door hinge.

For "variant 2" (cuts in areas A and C) or "variant 11" (cuts in areas A and B).

AR72.10-S-2662P

5

Remove front fender.

For "variant 2" (cuts in areas A and C) or "variant 11" (cuts in areas A and B).

AR88.10-S-1005P

6

Remove side running board.

Model 470, 471 with code T1A (left and right side running board)

AR88.30-S-2400P

7

Remove side bar with step.

Model 470, 471 with code Y1M (side bar with Tritt), model 470, 471 with code Y1N (side bar with Tritt)

AR88.30-S-0014P

8

Remove floor mats.

9

Remove front seat.

AR91.10-S-1000P

10

Remove emergency call system auxiliary battery.

Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)

AR82.95-S-0010P

11

Remove bracket (4).

Model 470 with code EC1 (eCALL Russia (ERA-GLONASS)), model 470 with code EY5 (Mercedes-Benz emergency call system)

 To do this, remove the screw/bolts (5).

12

Remove ISOFIX child seat securing system (6).

 To do this, remove bolts (7).

 Screw, ISOFIX child seat securing system to vehicle floor

*BA91.40-N-1013-01P

13

Remove bracket for seat belt retractor (8) of seat belt in rear from rear panel and vehicle floor.

AR91.40-S-0682P

14

Remove cap (9).

15

Remove bracket (10).

 Clip remover

*452589016300

16

Move floor covering out of working area.

17

Remove electrical subharnesses.

 Installation: Refasten electrical subharnesses.

18

Route electrical subharnesses out of working area.

19

Install in the reverse order.

 Seat belts/emergency tensioning retractors

Number

Designation

Model 471

Model 470

BA91.40-N-1013-01P

Screw, ISOFIX child seat securing system to vehicle floor

Nm

45

45