ar4010p1090a

Temporary tire sealing

ประเภท ar · หัวข้อ 40.10 · เวอร์ชัน 0106 · 2017-10-02

ใช้กับ: Model all (CAR, smart)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 2 Chassis › 40 Wheels, chassis alignment check › 40.10 Wheels, tires — ซีรีส์ 900 (รุ่น 9**) · ซีรีส์ 902 (รุ่น 9**) · ซีรีส์ 904 (รุ่น 918, 919, 924, 925, 938, 943, 957) · ซีรีส์ 906 (รุ่น 917, 918, 924, 953)

EinPAS 20 Chassis › 20.30 Wheel/tire › 20.30.30 Wheel/tire/spare wheel — ซีรีส์ 900 (รุ่น 9**) · ซีรีส์ 902 (รุ่น 9**) · ซีรีส์ 904 (รุ่น 918, 919, 924, 925, 938, 943, 957) · ซีรีส์ 906 (รุ่น 917, 918, 924, 953)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

AR40.10-P-1090A

Temporary tire sealing

27.09.2017

Model

all (CAR, smart)

Temporary tire sealing

1

Special Cement BL

2

Hand milling cutter

3

Chalk

4

Seal body

5

Flipper handle awl

6

Knife

7

Push button

8

Retaining bracket

9

Clamping hook

10

Awl

P40.10-6931-06

Temporary tire sealing

2

Hand milling cutter

10

Awl

P40.10-6930-05

Topical note

Notes on temporary tire sealing

AH40.10-P-1090-01A

Check

1

Check general condition of tire


In event of damage to sidewall or outside the repair area, provisional sealing may not be used.
Otherwise, the tire function cannot be ensured.

2

Search for point of damage on tire and mark with chalk (3)

Leakage spray can be used for assistance wen searching for the damage point.

If a damage point cannot be located, provisional sealing is not possible. The search can also be performed on a removed wheel and tire assembly.

Temporary tire sealing

*BR00.45-Z-1021-08A

Leak detection spray

*BR00.45-Z-1002-03A

Leakage detection spray for USA

*BR00.45-Z-1004-03A

3

Remove damage-causing object from tire using suitable tool

4

Check course, size and position of hole orifice at damage point


Hole orifices outside a specified repair area and over 6 mm in diameter may not be repaired.
A complete sealing of the hole orifice cannot be assured.

Provisionally sealed

5

Screw hand milling cutter (2) in clockwise direction several times into and out of damage point's hole orifice

The hole orifice is cleaned here.

Alternatively, a commercially available 6 mm carbide milling cutter tip may also be used with a drill machine or a cordless screwdriver.

Temporary tire sealing

*BR00.45-Z-1021-08A

6

Hook sealing body (4) into awl (10) and pull firmly downwards towards end of eyelet

The awl (10) must be plugged upwards into the end of the eyelet through the sealing body (4).

Temporary tire sealing

*BR00.45-Z-1021-08A

7

Release flipper handle on flipper handle awl (5) by applying thumb pressure to mounting frame bow (8) and opening up to end stop

Temporary tire sealing

*BR00.45-Z-1021-08A

8

Hook sealing body (4) into clamping hooks (9) of flipper handle awl (5) and close flipper handle again


Check sealing body (4) for cracks.
Otherwise, the sealing body (4) may fracture when pressed into the hole orifice.

Handle must latch into place.

Temporary tire sealing

*BR00.45-Z-1021-08A

9

Closed flipper handle awl (5) with clamped sealing body (4) in Special Cement BL (1)

Temporary tire sealing

*BR00.45-Z-1021-08A

10

Feed awl (10) with clamped sealing body (4) in hole orifice up to end stop


The awl (10) shall not be twisted when the sealing body (4) is inserted.
Otherwise, a firm seating of the sealing body (4) cannot be assured.

Temporary tire sealing

*BR00.45-Z-1021-08A

11

Operate push button (7) on flipper handle awl (5) and position sealing body (4) into hole orifice.

Temporary tire sealing

*BR00.45-Z-1021-08A

12

Pull flipper handle awl (5) out of hole orifice


The awl (10) may not be twisted when pulling out.
Otherwise, a firm seating of the sealing body (4) cannot be assured.

Temporary tire sealing

*BR00.45-Z-1021-08A

13

Cut off protruding end of sealing body (4) using knife (6) flush at the contact surface

Temporary tire sealing

*BR00.45-Z-1021-08A

Check

14

Correct air pressure of complete wheel to meet manufacturer's specifications

15

Check damage point for leaktightness


The leaktightness of the damage point must be assured.
In the event of any pressure loss on the complete wheel, the vehicle's road safety is no longer guaranteed.

Leakage spray can be used for assistance when checking for a leak.

Leak detection spray

*BR00.45-Z-1002-03A

Leakage detection spray for USA

*BR00.45-Z-1004-03A

16

Fit "Maximum permissible speed limit to 80 Km/h" information label into driver's field of vision

Temporary tire sealing

*BR00.45-Z-1021-08A

17

Document "Provisional tire repair" roadside assistance on "Service 24h Auftrag­Mercedes­Benz and smart" and have customer sign it

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-03A

Leak detection spray

Christof Fischer GmbH
www.kaeltefischer.de

BR00.45-Z-1004-03A

Leakage detection spray for USA

LIQUI MOLY
www.liqui-moly.com

BR00.45-Z-1021-08A

Temporary tire sealing

REMA TIP TOP AG
Order no.: 5103610
Order no.: 5103710
http://www.rema-tiptop.de

เอกสารที่อ้างถึง