D27.57-A000-08
1 | Auxiliary oil pump | 4 | Bolts | |
2 | Oil line | 5 | Oil guide pipe | |
3 | Electrical connector |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Notes on automatic transmission | |||
| Remove/install | ||
1 | Raise vehicle. | ||
2 | Remove bottom engine compartment paneling. | Transmission 722.9 in model 906 | |
3 | Clean oil pan of automatic transmission and surrounding area thoroughly. | | |
Use lint-free cleaning cloths when cleaning. Chamois leathers are the most suitable. | |||
Assembly cleaner | |||
4 | Remove drain screw from oil pan. | | |
Collect escaping transmission oil. | |||
Commercially available devices/tools | |||
Drain screw on oil pan | |||
If the overflow pipe has been pried off from the base of the oil pan. | |||
| |||
Fit overflow pipe of oil pan. | |||
5 | Remove oil line (2) on left of automatic transmission. | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Seal connections. Collect escaping transmission oil. | |||
Commercially available devices/tools | |||
Bolt, oil line to transmission housing | |||
Bolt, dual clamp to oil line | |||
Record plug | |||
6 | Disconnect electrical connector (3). | ||
7 | Support the automatic transmission. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
8 | Remove rear engine mount from automatic transmission. | Screw/bolt, rear engine mount to transmission | |
9 | Remove propeller shaft from flange at automatic transmission. | ||
Hang propeller shaft to one side. | |||
10 | Lift automatic transmission carefully. | ||
| 000 588 11 62 00 Major assembly mount | ||
| 000 588 10 62 00 Support plate | ||
| |||
11 | Remove screws/bolts (4). | Screw/bolt, auxiliary oil pump to transmission housing | |
12 | Remove auxiliary oil pump (1). | Seal connections. Collect escaping transmission oil. | |
Commercially available devices/tools | |||
Installation: Replace plain couplers (5). | |||
Record plug | |||
13 | Install in the reverse order. | ||
14 | Fill automatic transmission with oil. |
| |
Transmission 722.9 in model 906 | |||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
15 | Check auxiliary oil pump (1) for leak tightness with engine running. | ||
Notes on evaluating leakages | |||
Visual inspection only. |
129 589 00 91 00
Record plug