Disassemble and assemble rear section of transmission housing

AR26.40-D-2476C

27.4.99

TRANSMISSION 711.605

TRANSMISSION 711.620 /621

TRANSMISSION 711.620 /621
with CODE (N05) Countershaft PTO (2c) without flange
with CODE (N07) PTO countershaft (2b) with flange

TRANSMISSION 711.620 in MODEL 690.6

Disassemble and assemble rear section of transmission housing

D26.40-0012-06

Transmission 711.605/620/621

1 Rear section of transmission housing

2 Inductive-type pulse generator

3 Sealing ring

4 Oil filler screw

5 Oil drain plug

6 Sealing ring

7 Roller bearing bush
(with transmission 711.605)
outer race
(with transmission 711.620/621)

8 Main shaft bearing

9 Circlip

10 Bolt

11 Shift rail guide plate

12 Breather

D26.40-0013-12

Transmission 711.620/621 with code N05 or N07

2 Inductive-type pulse generator

13 Sealing ring

14 Screw plug

15 Screw plug

16 Sealing ring

 	Disassembling, assembling
1	Remove main shaft and countershaft		AR26.50-D-2001D
2	Remove shift rail guide plate (11)	 Installation: Install both bolts and press guide plate all the way down before tightening (arrow A).	*BA26.40-N-1010-01A
3	Pry off breather (12)	 Always replace breather
4	Press out inductive-type pulse generator (2) out from the inside
5	Remove circlip (9)	Installation: If transmission housing rear section has been replaced, main shaft bearing play must be adjusted: 
		Adjust main shaft bearing play	AR26.50-D-2001-01A
			*BE26.50-N-1001-01D
6	Press out main bearing shaft (8) using drift	 Drift for pushing out	*711589081500
		 Always replace main shaft bearing after pushing out. Installation: Place main shaft bearing in transmission housing such that locating pin can slot into provided recess in transmission housing (arrows B and C).
		 Drift for pushing in (with transmission 711.605)	*711589061500
		 With transmission 711.620/621, select suitable drift for pushing in.
7	Unscrew oil drain plug and oil filler screw (5, 4).	 Replace sealing rings (3, 6).
		 Oil filler screw	*BA26.40-N-1002-01A
		 Oil drain plug	*BA26.40-N-1001-01A
8	Remove gearshift shaft thrust bearing		AR26.60-D-0006A
9	PTO, dismantling	Only with transmission 711.620/621 with Code N05 or N07	AR26.45-D-0016A
10.1	Remove roller bearing bush (7)	Transmission 711.605
		 Internal extractor	*000589273300
		 Countersupport	*000589333300
		Installation: Use suitable drift for driving in.
10.2	Remove bearing outer race (7)	Transmission 711.620/621
		 Internal extractor	*000589293300
		 Countersupport	*000589343300
		Installation: Use drift for driving in.
		 Drift	*711589091500
11	Unscrew screw plugs (14, 15).	Only with transmission 711.620/621 with Code N05 or N07  Replace sealing rings (13, 16).
12	Assemble in reverse order

Adjustment data for ring gear and pinion

Number	Designation		Transmission 711.605	Transmission 711.620/621


BE26.50-N-1001-01D	Axial play between main shaft and circlip.	mm	0.02-0.08	0.02...0.08

 Transmission housing

Number	Designation		Transmission 711.605	Transmission 711.620/ 621


BA26.40-N-1001-01A	Oil drain plug	NM	60	60
BA26.40-N-1002-01A	Oil filler screw	NM	60	60
BA26.40-N-1010-01A	Bolt, shift rail guide to transmission housing	NM	23	23