Shown on transmission 711.6 |
1 | Filling screw |
2 | Drain screw |
N26.00-2087-01
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Draining | |||
1 | Lift vehicle with lifting platform. | ||
Topical note | Special instructions for lifting and supporting vehicle | ||
| |||
| |||
2 | Remove underfloor panels. | ||
| Model 907 with code XM1 (Noise abatement measures) | ||
| Clean | ||
3 | Clean area around the filler screw (1) and drain screw (2). | ||
4 | Remove filling screw (1). | ||
5 | Unscrew drain screw (2) and completely drain off transmission oil. | To do so, place a suitable receptacle under the drain screw (2). | |
| Clean | ||
6 | Clean drain screw magnet (2). | ||
7 | Replace sealing ring on oil drain screw (2). | Pay attention to correct seat of sealing ring. | |
8 | Screw in drain screw (2). | Apply light coating of oil to thread. | |
Transmission 711.6Drain screw | |||
Transmission 700.790Drain screw to transmission housing | |||
Pour in | |||
9 | Fill transmission with oil. | Observe specified filling quantity. | |
Transmission 711.6Gear oil | |||
Transmission 700.790Gear oil | |||
10 | Screw in filling screw (1). | Apply light coating of oil to thread. | |
Transmission 711.6Filling screw | |||
Transmission 700.790Filling screw to transmission housing | |||
11 | Install underbody paneling. | ||
| Model 907 with code XM1 (Noise abatement measures) | ||
12 | Lower vehicle with vehicle lift. | ||
13 | Confirm conducted operations in maintenance booklet or in Digital Service Booklet (DSB). |