Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration · ap2000b2010b · Mercedes-Benz WIS

AP20.00-B-2010B

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

31.10.2019

Engine	902.960 in model 384.076
Engine	904.924/957 in model 688.244
Engine	904.924/957 in model 688.276/277
Engine	904.925 in model 693.028
Engine	904.938/980 in model 693.103/171/185/186, 694.020
Engine	924.9 in model 384.061/067/069/078/223/311/333

Modification notes

17.05.2019	Cooling system - Approximate level		BF20.00-B-1001-01F
30.10.2019	Cooling system - Approximate level		BF20.00-B-1001-01F

Engine cooling system - check fluid level, adjust to correct level. Inspect
anticorrosion/antifreeze protection, adjust to correct concentration

B20.00-0027-01

Trucks with semi-extended cab
1	Cover

	Trucks with advanced cabin 688, 693
	1	Cover

B20.00-0014-01

B20.00-0012-01

B20.00-0028-01

B20.00-0015-01

Front engine bus

Cover

Rear engine bus

Cover

Special vehicles

Cover

	Check
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
1	Remove the expansion tank's cap (1)
2	Check the coolant level at the expansion tank	 To check the level, the coolant temperature should be below 50ºC.
		 Before replenishing, if necessary, check the coolant's concentration.
		It is not necessary to replenish it, when the coolant level is:
		
		Trucks with extended cabin (688, 693) - between the upper edge of the supply mouth and the reference (arrow) inside the reservoir.
		Trucks with semi-extended cabin, buses and special vehicles - between the Max /Min marks.
3	Check the cooling liquid concentration
			SI00.00-B-0080A
		 In the case it is not right, re-establish the coolant's concentration.
4	Reestablish the coolant's concentration	Engines 902.960, 904.924/957/925/938/980, 924.9	AP20.00-B-2080-01B
	Notes on coolant	.	AH20.00-B-2080-01A
		Engines 904.924/957/938/980, 924.9	AP20.00-B-2080-01B
	Service Information: Auxiliary materials for vehicle maintenance and repair		SI00.00-B-0080A
		Replace coolantEngine 904.938 in Type 694.020	AP20.00-B-2080C
		 Engines 904.924/957/938Cooling system - Approximate level	*BF20.00-B-1001-01F
5	Replenish the coolant level at the expansion tank	 Only utilize the recommended liquid.
		Supply the cooling system up to the maximum level reference mark:
		
		Trucks with semi-advanced cab, Bus and Special vehicles - up to the Max. mark
		Trucks with extended cabin (688, 693) - up to the upper edge of the tank's supply mouth.
6	Install the expansion tank's cap (1)

 Engine cooling system capacity

Number	Designation				Engine 904.924/957 in Type 688.27 Engine 904.978 in Type 384	Engine 904.938 in Type 693
BF20.00-B-1001-01F	Cooling system - Approximate level	Vehicles without retarder		Litros	20	22
		Do not mix products between classes	Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5	%	50	50
			Anti-corrosion CLASS MB 312.0	%	10	-
		Product already diluted	Anti-corrosive/anti-freeze CLASSES MB 326.0, MB 326.3	Litros	20	22
		Vehicles with retarder		Litros	-	-
		Do not mix products between classes	Anti-corrosive/anti-freeze CLASSES MB 325.0, MB 325.3, MB 325.5	%	-	-
			Anti-corrosion CLASS MB 312.0	%	-	-

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

เอกสารที่อ้างถึง