Model | 930, 932, 933, 934 |
except code Z27 (Fire-fighting vehicle) | |
except code Z56 (Pre-delivery inspection for fire-fighting vehicles) | |
Model | 940, 942, 943, 944 |
except code Z27 (Fire-fighting vehicle) | |
except code Z56 (Pre-delivery inspection for fire-fighting vehicles) | |
Model | 949 |
Model | 950, 952, 953, 954 |
except code Z27 (Fire-fighting vehicle) | |
except code Z56 (Pre-delivery inspection for fire-fighting vehicles) | |
Model | 956, 963, 964, 967 |
except code V5W (Fire-fighting vehicle) | |
except code V5Z (Delivery inspection, fire-fighting vehicles) | |
Model | 957 |
except code Z27 (Fire-fighting vehicle) | |
except code Z56 (Pre-delivery inspection for fire-fighting vehicles) | |
Model | 959 |
Model | 970, 972, 974, 975, 976 |
except code Z27 (Fire-fighting vehicle) | |
except code Z56 (Pre-delivery inspection for fire-fighting vehicles) |
| A = Delivery inspection | |
| Ü = Hand-over inspection before hand-over to Sales/customer |
G00.20-3142-11
Customer | Order number |
License plate number | Current mileage |
Date | Signature |
A | Ü | Input condition not OK: | | ||||
Completed | |||||||
| | ||||||
| | | |||||
General information | |||||||
| | Only perform delivery and hand-over inspection on vehicles without Digital Service Booklet (DSB). |
| ||||
Service Information: Omission of delivery and hand-over inspection | |||||||
On vehicles with a Digital Service Booklet, the delivery and handover inspection may be carried out, but this is not prescribed by the manufacturer. | |||||||
Visual, status and function checks | |||||||
| Check for open service measures |
| | ||||
Service measures may be due if the vehicle has been idle for a longer period. | |||||||
| Check and update map data. |
| | ||||
Model 956, 963, 964 with code J2D (Bluetooth radio/navigation system, comfort) | |||||||
| Check vehicle interior and exterior for cleanliness. |
| | ||||
| Check vehicle documents, vehicle keys, operator's manual and maintenance booklet for completeness. |
| | ||||
| Check vehicle tool kit, jack, warning triangle, warning lamp,and first-aid kit for proper operation and completeness. |
| | ||||
| Check engine, transmission, transfer case, axles, steering, power-steering pump, and cab tilt system for leak tightness and condition. |
| | ||||
Check engine oil level. | |||||||
| Check air intake line between air filter, charge air cooler and engine for leak tightness and condition. |
| | ||||
| Cooling and heating system: Check radiator, lines and hoses for leak tightness and condition. |
| | ||||
| Check exhaust system for leak tightness and condition. |
| | ||||
| Check all containers, devices, shock absorbers, covers, boots, dust caps for leak tightness and condition. |
| | ||||
| Check all lines and hoses, sensor cables for chafe marks and correct routing. |
| | ||||
| Check engine cooling system corrosion/antifreeze protection. |
| | ||||
____________ °C | |||||||
Body, front end, body, platform | |||||||
| Check condition (fit and adjustment). |
| | ||||
Check maintenance flap, engine hood, doors and flaps of side stowage compartments. | |||||||
| Check for function and easy movement of door locks, door handles and locks. |
| | ||||
| Check for paint damage. |
| | ||||
May not occur in any visible areas. | |||||||
| Check for any paint runs. |
| | ||||
Individual paint runs in the body's textured paint are permissible. The run structure (orange peel) is not a quality problem. | |||||||
| Check for corrosion. |
| | ||||
There must be no outer visible signs of corrosion on folds and overlaps on the entire body. Pay greater attention to street dust and industrial fallout (rust film particles). If the paint surface exhibits relevant characteristics, remove them using suitable care products. | |||||||
Chassis, frame, frame detachable parts | |||||||
| Check condition. |
| | ||||
| Check paint. |
| | ||||
No special requirements are placed on the surface quality of the paintwork. | |||||||
| Check for corrosion. |
| | ||||
No outer visible signs of corrosion on folds and overlaps must occur on the entire frame. | |||||||
Vehicle interior, equipment, trim, seats | |||||||
| Driver, front passenger seat: Check for function, easy movement. |
| | ||||
Check seat position for all seat settings. | |||||||
| Check seat belts. |
| | ||||
Belt height adjustment must function smoothly and engage securely in the individual locking positions. | |||||||
| Check for condition, damage. |
| | ||||
Check all covers, paneling and upholstery for damage, correct condition and attachment. | |||||||
| Signaling system, indicator lamps: Check function. |
| | ||||
| Windshield wipers, windshield washer system, headlamp cleaning system: Check for function and adjustment. |
| | ||||
| Heating system, ventilation and air conditioning system: Check for function and operation. |
| | ||||
| Windows and roof hatch: Check for function and easy movement. |
| | ||||
Transport mode | |||||||
| Deactivate transport mode. |
| |||||
Model 963, 964 of model generation 5 | |||||||
Wheels, tires, spare wheel, brake system | |||||||
| Check condition. |
| | ||||
Tires and rims must not show any signs of damage. | |||||||
| Check for tight fit. |
| | ||||
Re-tighten all wheel nuts to specified tightening torque. Do not undo wheel bolts/nuts. | |||||||
| Check tire pressure. |
| | ||||
| Service brake and parking brake: Check function. |
| | ||||
| Check/adjust setting of air suspension valve of leading or trailing axle. |
| | ||||
Model 964 with code I6W (Leaf spring suspension, rear axle) with code JZAB (Chassis modification to 10x4/6 trailing axle) or with code JZAK (Chassis modification to 10x6/6 trailing axle) or with code JZAO (Chassis modification to 10x4/6 leading axle) | |||||||
Hand-over inspection | |||||||
| Confirm delivery inspection certificate in maintenance booklet or Digital Service Booklet (DSB). |
| |||||
Confirm verification in maintenance booklet or fill out Digital Service Booklet (DSB). | |||||||
| Print out product instructions, form. |
| |||||
Print the form and place into the vehicle, or hand over to Sales. | |||||||