si3500w0007a

Service Information: Oil level of driven axles in new vehicles

Typ si · téma 35.00 · verzia 0100 · 2012-08-13

Platí pre: MODEL 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 963, 964, 970, 972, 974, 975, 976

Nie je k dispozícii v jazyku „sk“; zobrazené v jazyku Anglicky.

Zaradenie

Funkčná skupina 2 Podvozok › 35 Zadná náprava › 35.00 Všeobecné — Rad 930 · Rad 932 · Rad 933 · Rad 934 · Rad 940 · Rad 942 · Rad 943 · Rad 944 · Rad 949 · Rad 950 · Rad 952 · Rad 953 · Rad 954 · Rad 957 · Rad 963 · Rad 964 · Rad 970 · Rad 972 · Rad 974 · Rad 975 · Rad 976

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.1 Basic information — Rad 930 · Rad 932 · Rad 933 · Rad 934 · Rad 940 · Rad 942 · Rad 943 · Rad 944 · Rad 949 · Rad 950 · Rad 952 · Rad 953 · Rad 954 · Rad 957 · Rad 963 · Rad 964 · Rad 970 · Rad 972 · Rad 974 · Rad 975 · Rad 976

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Rad 930 · Rad 932 · Rad 933 · Rad 934 · Rad 940 · Rad 942 · Rad 943 · Rad 944 · Rad 949 · Rad 950 · Rad 952 · Rad 953 · Rad 954 · Rad 957 · Rad 963 · Rad 964 · Rad 970 · Rad 972 · Rad 974 · Rad 975 · Rad 976

SI35.00-W-0007A

Service Information: Oil level of driven axles in new vehicles

8.8.12

MODEL

930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 963, 964, 970, 972, 974, 975, 976

Each driven axle is filled at the factory with the required oil quantity. The specified required oil quantity has taken the technical facts, e.g. different gear wheel diameters in the differential with various gear ratios into account. The required oil quantity and the installation position of the axle in the vehicle determine the level of the oil in each axle.

The oil level of the driven axles in new vehicle must not necessarily reach the lower edge of the filler/inspection opening. When checking the oil on these vehicles an oil level of up to 25 mm below the lower edge of the filler/inspection opening is OK. With this the lubrication is always fully guaranteed and a refill is not required.

In future any warranty claims received for correcting the oil level based on this information will be rejected. The overflow method is to remain in use for maintenance services or following an axle repair.