ar4610p0100rt

Remove/install steering wheel

Tip ar · temă 46.10 · versiune 0102 · 2012-02-23

Valabil pentru: MODEL 251

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.10 Volan, coloană volan, arbore de direcţie, blocare direcţie — Seria 251

EinPAS 22 Direcţie › 22.15 Servodirecţie › 22.15.40 Volan/Coloană de direcție/Coloană volan/Închizătoare blocare direcție — Seria 251

AR46.10-P-0100RT

Remove/install steering wheel

21.2.12

MODEL 251

Remove/install steering wheel

P46.10-2659-07

1 Steering wheel

2 Bracket

3 Wiring harness

4 Countersunk screw

5 Electrical connector

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Move steering wheel (1) to horizontal position

Front wheels in straight-ahead position.

2

Disconnect battery ground cable

AR54.10-P-0003RT

3

Remove driver airbag unit

AR91.60-P-0660RT

4

Separate electrical connector (5)

5

Detach wiring harness (3) from the bracket (2)

6

Remove countersunk screw (4); counterhold steering wheel (1) when doing so

Installation: Replace countersunk screw.

*BA46.10-P-1001-02H

7

Remove steering wheel (1), in the process guide the wiring harness (3) through the opening in the steering wheel (1)

Installation: Assign the cutouts of the serrations in the steering wheel to the markings on the steering shaft (arrows).

8

Clock spring contact for damage

When the steering wheel (1) is detached the clock spring contact must not be twisted otherwise it will be damaged.

Perform a visual inspection and install new clock spring contact if necessary; see:

Remove/install clock spring contact

AR46.10-P-0200RT

9

Install in the reverse order

10

Conduct a road test

Tests during the road test:

Turn signal reset

If the steering wheel (1) is offset by more than one tooth, perfect turn signal indicator reset is no longer guaranteed.

Airbag indicator lamp

The SRS indicator lamp must not light up on full steering lock in both directions.

Position of steering wheel (1)

If the steering wheel (1) is at a slant, adjust it by max. one tooth.

Steering wheel

Number

Designation

Model
251

BA46.10-P-1001-02H

Bolts, steering wheel to steering shaft

Nm

80

Documente menționate