ME-SFI fuel injection and ignition system (ME), DTC memory · ad0761p4000fb · Mercedes-Benz WIS

AD07.61-P-4000FB

ME-SFI fuel injection and ignition system (ME), DTC memory

25.11.2019

Engine	120
	Fault codes from P0440 to P0799

 Danger	Risk of death. Death may occur if body parts are drawn into rotating vehicle parts.	Do not insert your hand into rotating parts. Wear closed and snug-fitting work clothes. Secure area of rotating vehicle components against unauthorized access.	AS00.00-Z-0004-01A
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
 Danger	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
Topical note	Notes on avoiding damage to ignition system	Engine 120mit Benzin-Einspritzanlage LH	AH15.10-P-0002-01D
	Connecting hand-held tester (HHT), reading fault memory		AD00.00-P-2000-03A
	Gasoline injection and ignition system (ME-SFI) - Diagnosis - Previous knowledge	Check. regulate engine Engine DMAN, Reg. B	AD07.61-P-2000F
	Notes on ME-SFI diagnostic trouble code memory		AD07.61-P-2000-10F
	Reading out the fault code with the pulse counter is not possible
	 Characters for emissions-relevant faults which lead to the actuation of the CHECK-ENGINE indicator lamp in USA vehicles. This is only actuated when the tests have been carried out and faults have been detected.
	Ignition ON
	Fault memory
Fault code	Fault text	Possible cause/note	Remedy
	No fault detected	Depending on complaint, perform complete ME-SFI electrics test	AD07.61-P-6000F
			AD07.61-P-6001F

			AD07.61-P-6002F

			AD07.61-P-6003F

			AD07.61-P-6004B

			AD07.61-P-6300B

     	Purge system leaky (function chain)		AD07.61-P-6000-29D
			AD07.61-P-6000-30D

		Model 129 as of 9/97  , model 140 	AD07.61-P-6000-31D

	Purge system leaky (function chain) fault code description, ME-SFI	Model 129 as of 9/97  , model 140 	AD07.61-P-4000-17B
     	Right purging nonfunctional		AD07.61-P-6000-29D
			AD07.61-P-6000-30D

	Purging nonfunctional fault code description, ME-SFI		AD07.61-P-4000-18A
     	Purge system slightly leaky	Model 129 as of 9/97  , model 140 	AD07.61-P-6000-31D
	Purge system leaky (function chain) fault code description, ME-SFI	Model 129 as of 9/97  , model 140 	AD07.61-P-4000-17B
     	Right purge control valve (Y58/3)		AD07.61-P-6000-29D
	Purge control valve fault code description, ME-SFI		AD07.61-P-4000-19B
     	A activated charcoal canister shutoff valve (function chain)		AD07.61-P-6000-29D
		Model 129 as of 9/97  , model 140 	AD07.61-P-6000-31D

		Model 129 as of 9/97  , model 140 	AD07.61-P-6000-33D

	B activated charcoal canister shutoff valve (Y58/4)	Model 129 as of 9/97  , model 140 	AD07.61-P-6000-32D
	Activated charcoal canister shutoff valve fault code description, ME-SFI	Model 129 as of 9/97  , model 140 	AD07.61-P-4000-20B
     	Tank pressure sensor (B4/3)	Model 129 as of 9/97  , model 140 	AD07.61-P-6000-33D
			Activated charcoal canister clogged

	Tank pressure sensor fault code description, ME-SFI	Model 129 as of 9/97  , model 140 	AD07.61-P-4000-21B
	Purging monitoring pressure sensor (B4/4)	Model 129 up to 8/97 	AD07.61-P-6000-48C
	Purging monitoring pressure sensor fault code description, ME-SFI	Model 129 up to 8/97 	AD07.61-P-4000-22A
     	Purge system highly leaky Fuel tank pressure sensor	Model 129 as of 9/97  , model 140 	AD07.61-P-6000-31D
		Model 129 as of 9/97  , model 140 	AD07.61-P-6000-33D

	Purge system leaky (function chain) fault code description, ME-SFI	Model 129 as of 9/97  , model 140 	AD07.61-P-4000-17B
    	Fuel level too low		Top up fuel
    	A front left speed signal B rear left speed signal	Up to 5/98	AD07.61-P-6002-10A
		Up to 5/98	AD07.61-P-6002-11A

	Speed signal fault code description, ME-SFI	Up to 5/98	AD07.61-P-4000-23B
     	Idle speed control	At right ME-SFI [ME] control unit (N3/12)	AD07.61-P-6002-08B
		At left ME-SFI [ME] control unit (N3/11)	AD07.61-P-6002-09B

			AD07.61-P-6002-12A

	Idle speed control fault code description, ME-SFI		AD07.61-P-4000-24B
    	Power supply at ME-SFI [ME] control unit (N3/11) or (N3/12)		AD07.61-P-6000-01E
			AD07.61-P-6000-70A

			AD07.61-P-6000-71A

	Control unit power supply fault code description, ME-SFI		AD07.61-P-4000-59B
    	Cruise control switch (S40)		AD07.61-P-6004-01B
			AD07.61-P-6003-01B

    	CAN of ESP		AD07.61-P-6000-34D
	CAN malfunctioning fault code description, ME-SFI		AD07.61-P-4000-26B
    	A left (N3/11) or right (N3/12) ME-SFI [ME] control unit B left (N3/11) or right (N3/12) ME-SFI [ME] control unit		N3/11 or N3/12
    	Left (N3/11) or right (N3/12) ME-SFI [ME] control unit		N3/11 or N3/12
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Gear implausible or transmission leaky fault code description, ME-SFI		AD07.61-P-4000-27B
	Command shift valve jamming in pressure position fault code description, ME-SFI		AD07.61-P-4000-28B
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	EGS control unit fault code description, ME-SFI		AD07.61-P-4000-29B
	Valve supply voltage fault code description, ME-SFI		AD07.61-P-4000-30B
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Rpm sensor supply voltage and function fault code description, ME-SFI		AD07.61-P-4000-31B
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	CAN fault detection fault code description, ME-SFI		AD07.61-P-4000-32B
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Gear comparison negative (several times) fault code description, ME-SFI		AD07.61-P-4000-33B
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Torque converter lockup clutch fault code description, ME-SFI		AD07.61-P-4000-34A
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Torque converter lockup PWM solenoid valve fault code description, ME-SFI		AD07.61-P-4000-35A
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	Modulating pressure control solenoid valve fault code description, ME-SFI		AD07.61-P-4000-36A
	Shift pressure control solenoid valve fault code description, ME-SFI		AD07.61-P-4000-37A
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	1-2/4-5 shift solenoid valve fault code description, ME-SFI		AD07.61-P-4000-38A
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	2-3 shift solenoid valve fault code description, ME-SFI		AD07.61-P-4000-39A
     	Read out automatic transmission control unit fault memory		AD27.19-P-1000AZ
	3-4 shift solenoid valve fault code description, ME-SFI		AD07.61-P-4000-40A

Documente menționate

ad0000p200003a
ad0761p200010f
ad0761p2000f
ah1510p000201d Indicaţii pentru evitarea producerii de avarii la instalaţia de aprindere
as0000z000401a Pericol de moarte prin prinderea în componentele autovehicului aflate în rotaţie
as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)
as4700z000101a Pericol de explozie prin aprindere, pericol de intoxicare prin inhalare şi înghiţire de carburant cât şi pericol de rănire prin contactul pielii şi ochilor cu carburantul