Remove/install passenger airbag unit

AR91.60-P-0680D

Remove/install passenger airbag unit

25.04.2018

Model

140

2

Retaining clips

3

Glove compartment insert

4

Bolts

5

Latch

6

Nuts

7

Front passenger airbag unit

10

Electrical connector

X11/13

Electrical connector

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Switch off ignition and remove ignition key

2

Disconnect battery ground line

3

Remove floor covering in front passenger footwell

4

Remove footrest on front passenger footwell firewall

5

Disconnect electrical connector (X11/13) in front passenger footwell

6

Open glove compartment door

7

Unclip retaining clips (2) from glove compartment box insert (3)

8

Press glove compartment box insert (3) together a little and pull out

9

Disconnect electrical connector from glove compartment illumination

10

Unscrew screws/bolts (4) on latch (5)

11

Disconnect electrical connector (10) on front passenger airbag unit (7)

12

Unscrew nuts (6) on bracket of front passenger airbag unit (7)

13

Remove front passenger airbag unit (7) though glove box opening

14

Install in the reverse order



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

16.1

Start engine, SRS/RS indicator lamp must go off after approx. 4 s

Model 140 as of 7/1/93

If SRS/RS indicator lamp does not go off after approx. 4 s.



Read out fault memory with HHT diagnostic system and perform airbag test program.



Airbag (AB) diagnosis contents

AD91.60-P-1000AZ

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

16.2

Start engine, SRS/RS indicator lamp must go off after approx. 4 s

Model 140 up to 6/30/93

If SRS/RS indicator lamp does not go off after approx. 4 s.



Read out fault memory with pulse counter and perform driver/front passenger airbag diagnosis.

AR91.60-P-0622-02A

 Pulse counter

*124589192100

 Adapter

*140589146300