ar6000d0058ts

Remove/install detachable parts for replacing lower center side wall paneling

Typ ar · temat 60.00 · wersja 0201 · 2020-04-14

Dotyczy: Model 907.6/7, 910.6

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 3 Nadwozie › 60 Nadwozie kompletne › 60.00 Informacje ogólne — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.35 Błotnik/ ściana boczna — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.38 Poszycie z lewej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

EinPAS 35 Karoseria/ rama/ elementy domontowane › 35.34 Ściana boczna › 35.34.39 Poszycie z prawej strony — Seria 907 (modele 6**, 7**) · Seria 910 (modele 6**)

AR60.00-D-0058TS

Remove/install detachable parts for replacing lower center side wall paneling

14.04.2020

Model

907.6/7, 910.6

Modification notes

19.12.2019

Method extended

Step 4

Remove/install detachable parts for replacing lower center side wall paneling

Shown on model 907.6, left side of vehicle

D63.10-1936-06

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 910.6 with engine 780.703

AS00.00-Z-0035-01A

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on battery

Model 910.6 with engine 780.703

AH54.10-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove respective protective strips.

AR88.80-D-1040TS

2

Remove fuel filler flap.

If left side of vehicle is damaged.

AR88.60-D-6023TS

3

Remove respective underfloor paneling.


Model 907.6/7
with code XM1 (Noise reduction)
Model 910.6 with engine 651
with code XM1 (Noise reduction)
Model 910.6 with engine 780.703

AR61.30-D-1001TS

4

Remove respective underfloor paneling at high-voltage battery carrier.

* Applies to Europe only

Model 910.6 with engine 780.703

AR61.30-D-1002TE

5

Remove filler neck.

If left side of vehicle is damaged.

Model 907.6 with engine 654.9
Model 907.6/7 with engine 642, 651
Model 910.6 with engine 651

AR47.10-D-7541TS

Model 907.6/7 with engine 274

AR47.10-D-7541TSC

6

Remove respective front side load compartment trim.


Model 907.6, 910.6 with code V25 (Load compartment trim up to belt rail, simple) or with code VA1 (Load compartment trim up to belt rail, standard) or with code VA2 (Load compartment interior trim up to roof height (wood)) or with code VA3 (Load compartment interior trim up to roof height, can be washed)

AR68.30-D-1185TS

7

Remove respective front side wall trim.


Model 907.6
with code V21 (Interior panelling luxury)
Model 907.7

AR68.30-D-1209TSR

8

Remove respective center side wall trim.


Model 907.6
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
with code V21 (Interior panelling luxury)
Model 907.6
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)
with code V21 (Interior panelling luxury)
Model 907.7
with code IR6 (Wheelbase 4325 mm, overhang 1615 mm)
Model 907.7
with code IR7 (Wheelbase 4325 mm, overhang 2015 mm)

AR68.30-D-1211TSR

9

Install in the reverse order.

Powiązane dokumenty