Expansion reservoir |
D20.30-0023-01
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | Notes on coolant | ||
Notes on coolant level | |||
| Check | ||
1 | Check fluid level. | Only check fluid level at a coolant temperature lower than 50 °C. | |
2 | Unscrew cap of expansion reservoir. | ||
3 | Check anticorrosion and antifreeze protection. | If necessary, | |
| |||
Correct anticorrosion and antifreeze protection. | |||
| Coolant specifications | ||
Make sure that the mixing ratio of the coolant is correct. | |||
Mixture ratio for coolant | |||
Coolant | |||
Correct | |||
4 | Correct fluid level. | Only if the fluid level is too low. | |
Make sure that the mixing ratio of the coolant is correct. | |||
5 | Screw on cap of expansion reservoir. |
Engine cooling |
Number | Designation | Engine 654 in model 907 with code H12 (Auxiliary water heater) or with code H13 (Rear additional heat exchanger) or with code HZ9 (Heater booster) | Engine 654 in model 907 | ||
BF20.00-N-1001-01TS | Coolant | Total filling capacity | Liter | 12,4 | 10 |
Corrosion/antifreeze down to 37°C | Liter | 6,3 | 5,1 | ||
Corrosion/antifreeze down to 45°C | Liter | 7 | 5,6 | ||
Sheet | |||||
Sheet | |||||
Engine cooling |
Number | Designation | Engine 642 in model 907 | Engine 642 in model 907 with code H12 (Hot-water auxiliary heater) or code H13 (Rear additional heat exchanger) or code HZ9 (Heater booster) | ||
BF20.00-N-1001-01TS | Coolant | Total filling capacity | Liter | 11,6 | 14,4 |
Corrosion/antifreeze down to 37°C | Liter | 5,8 | 7,2 | ||
Corrosion/antifreeze down to 45°C | Liter | 6,4 | 7,9 | ||
Sheet | |||||
Sheet | |||||
Engine cooling |
Number | Designation | Engine 651 in model 907 | Engine 651 in model 907 with code H12 (Hot-water auxiliary heater) or code H13 (Rear additional heat exchanger) or code HZ9 (Heater booster) | ||
BF20.00-N-1001-01TS | Coolant | Total filling capacity | Liter | 9,8 | 12,2 |
Corrosion/antifreeze down to 37°C | Liter | 4,9 | 6,1 | ||
Corrosion/antifreeze down to 45°C | Liter | 5,4 | 6,7 | ||
Sheet | |||||
Sheet | |||||