ar4330w0008a

Removing and installing upper oil reservoir cover

Tyyppi ar · aihe 43.30 · versio 0111 · 2005-06-02

Koskee: MODELS 375.4, 930, 932, 933, 934, 944, 950, 952, 953, 954 with CODE (BA9) Voith secondary retarder R 115

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 43 Jarrujen paineilmaosat, lisäjarrut › 43.30 Hidastin (hydraulinen) — Mallisarja 375 (mallit 4**) · Mallisarja 930 · Mallisarja 932 · Mallisarja 933 · Mallisarja 934 · Mallisarja 944 · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954

EinPAS 21 Jarrut/alipainelaite/paineilmajärj. › 21.21 Hidastin › 21.21.30 Kotelo/kansi/akseli/hidastin — Mallisarja 375 (mallit 4**) · Mallisarja 930 · Mallisarja 932 · Mallisarja 933 · Mallisarja 934 · Mallisarja 944 · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954

AR43.30-W-0008A

Removing and installing upper oil reservoir cover

8.1.96

MODELS 375.4, 930, 932, 933, 934, 944, 950, 952, 953, 954 with CODE (BA9) Voith secondary retarder R 115

Removing and installing upper oil reservoir cover

W43.30-1124-12

Shown on model 930

1 Upper oil reservoir cover

2 Seal

3 Oil reservoir

4 Short bolt

5 Bolt, long

6 Bracket

7 Bolt

Remove/install

Danger!

Risk of injury due to touching the hot retarder surface or being scalded with hot retarder surface oil. Risk of injury to skin or eyes due to retarder oil spraying out under high pressure

Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder surface

AS43.30-Z-0001-01A

1

Engine control/permanent brake operating lever on position "0" and switch off ignition

2

Remove step plate

On semitrailers/tractor combinations except model 375.4, 944

3

Remove retarder proportioning valve and damping plate

AR43.30-W-0001A

4

Detach bracket (6)

*BA43.30-N-1001-01A

*BA43.30-N-1002-01A

5

Detach upper oil reservoir cover (1) from oil reservoir (3)

Installation: Replace gasket (2).

Tighten upper oil reservoir cover as per the specification.

AR43.30-W-0008-01A

*BA43.30-N-1002-01A

6

Install in the reverse order

Retarder

Number

Designation

Models 375, 944
with code (BA9) Voith secondary retarder R 115

Model
930, 932, 933, 934,
950, 952, 953, 954
with (code BA9)
Voith secondary retarder R 115

BA43.30-N-1001-01A

Bolt, profile ventilation cover at retarder housing

Nm

25

25

BA43.30-N-1002-01A

Bolt, oil reservoir cover at top to oil reservoir

Initial torque

Nm

17

17

Final torque

Nm

25

25

Viitatut asiakirjat