si0000d0049a

Service Information: Minibus on the Sprinter basis

Type si · topic 00.00 · version 0100 · 2003-07-18

Applies to: MODEL 903.663 with CODE (ZV1) Minibus Group 15 MODEL 904.663 with CODE (ZV2) Minibus Group 18/21 MODEL 902.662 /672, 903.662 /663 /672 /673 with CODE (ZV3) Minibus Mobile MODEL 902.662 /672, 903.662 /663 /672 /673 with CODE (ZV4) Minibus Taxi MODEL 903.672 with CODE (ZV6) Minibus VIP MODEL 904.663 with CODE (ZV5) Minibus Tourist

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.00 General — Series 902 (models 662, 672) · Series 903 (models 662, 663, 672, 673) · Series 904 (models 663)

EinPAS 45 Data/information › 45.10 Overall vehicle › 45.10.20 Overall vehicle — Series 902 (models 662, 672) · Series 903 (models 662, 663, 672, 673) · Series 904 (models 663)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Series 902 (models 662, 672) · Series 903 (models 662, 663, 672, 673) · Series 904 (models 663)

SI00.00-D-0049A

Service Information: Minibus on the Sprinter basis

15.7.03

MODEL 903.663 with CODE (ZV1) Minibus Group 15

MODEL 904.663 with CODE (ZV2) Minibus Group 18/21

MODEL 902.662 /672, 903.662 /663 /672 /673 with CODE (ZV3) Minibus Mobile

MODEL 902.662 /672, 903.662 /663 /672 /673 with CODE (ZV4) Minibus Taxi

MODEL 903.672 with CODE (ZV6) Minibus VIP

MODEL 904.663 with CODE (ZV5) Minibus Tourist

As of October 2003, Evobus minibusses on the basis of Sprinters are being sold as complete vehicles in Italy, Austria and the Netherlands through the Mercedes Benz Sales Organizations.

The following Sprinters with the following designations are being sold:

Minibus Group 15 (Code ZV1)

Minibus Group 18/21 (Code ZV2)

Minibus Mobile (Code ZV3)

Minibus Taxi (Code ZV4)

Minibus Tourist (Code ZV5)

Minibus VIP (Code ZV6)

There is an After Sales service available for these vehicles in the MB Service Organization, which also partially extends beyond the borders of the aforementioned countries.

With this Service Information we are informing you about the service agreement with Evobus.

Parts documentation and supply

The documentation of the Evobus body parts is made in the EPC under model designation 612.700. To identify parts, the assembly numbers must be taken form the text field in FDOK.

Ordering of parts is made through the Evobus subsidiaries and the Service Centers in each country.

If you have any questions about the parts, please contact the subsidiary.

Operation texts and flat rates

Operations texts and flat rates will be published for the most common operation items. Procedures varying from these should be defined by flat rates specified by the workshop foreman.

Service literature

Operator's manuals

The supplementary manuals for the Minibus ranges will be included with the vehicles.

Workshop literature

The most important repair and adjustment work will be published in the Workshop Information System WIS.

Maintenance sheet

is included in WIS.

Additional testing and special equipment is not necessary.

Training:

Training will be determined country-specific.

Warranty processing/hotline:

The Sprinter warranty conditions are valid for the entire scope of equipment in the vehicle.

The warranty and goodwill process will be made using the VEGA system. Bus-specific damage codes are available.

Requests are to be directed to the corresponding country service centers. The Evobus service center at the Mannheim plant is responsible for the bus-related equipment.

Service Center Minibus

SI00.00-D-0049-01A

Referenced documents