Adjust sliding door

AR72.16-D-1023F

Adjust sliding door

26.01.2015

MODEL

900.6

with CODE T16 (Sliding door right)

MODEL

906.6/7

with CODE T16 (Sliding door right)

MODEL

906.6/7

with CODE T19 (Sliding door left)

1

Screw

2

Guide wedge

3

Screw

4

Sliding block

A

Ridge pattern

O

Gap dimension

P

Gap dimension

Q

Gap dimension

R

Gap dimension

5

Rotary tumbler

15

Release for electrical drive (with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door) except CODE PE4 (Mastercode bus DCAA, Argen company) and except CODE PE5 (Mastercode bus, Argen company, Argen company) and except CODE T63 (Release for electrical sliding door(s)))

18

Emergency release lever (with CODE T55 (Electrical actuation for right sliding door), with CODE PE4 (Mastercode bus DCAA, Argen company) or with CODE PE5 (Mastercode bus platform seating, Argen company))

20

Lever (with CODE T55 (Electrical actuation for right sliding door) with CODE T63 (Release for electrical sliding door(s)))

19

Outer emergency release (with CODE T55 (Electrical actuation for right sliding door) with CODE T63 (Release for electrical sliding (s)))



Check

1

Check gaps dimensions (O, P, Q, R) and ridge pattern (A) on sliding door all the way around

MODEL 900.6, MODEL 906.6/7

Gap dimension

*BE60.00-N-1007-01C

Bead offset max.

*BE72.16-N-1003-01C

Minimum distance from sliding door to center guide rail

*BE72.16-N-1006-01C

 Feeler gauge

*129589032100

Adjust

2.1

Turn release for electrical drive (15) 180° clockwise to "MAN" position using key

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door) except CODE T63 (Release for electrical sliding door(s)), MODEL 906.6/7 with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door) except CODE PE4 (Mastercode bus DCAA, Argen company) and except CODE PE5 (Mastercode bus platform seating, Argen company)

 Motor coupling of electrical actuating for sliding door is unlocked.
It is necessary to release the motor coupling to allow the sliding door to be opened and closed easily during adjustment.

2.2

Turn emergency release lever (18) outside clockwise

MODEL 906.657 with CODE PE4 (Mastercode bus DCAA, Argen company) with CODE T55 (Electrical actuation for right sliding door), MODEL 906.657 with CODE PE5 (Mastercode bus platform seating, Argen company) with CODE T55 (Electrical actuation for right sliding door)

 Motor coupling of electrical actuating for sliding door is unlocked.
It is necessary to release the motor coupling to allow the sliding door to be opened and closed easily during adjustment.

Motor coupling does not release correctly:



Adjust cables of emergency release for sliding door.

MODEL 906.657 with CODE PE4 (Mastercode bus DCAA, Argen company) or with CODE PE5 (Mastercode bus platform seating, Argen company)

AR72.16-D-2214A

2.3

Actuate lever (20) of outer emergency release (19)

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door) with CODE T63 (Electrical sliding door release))

 Retainer must arrest.
Motor coupling of electrical actuating for sliding door is unlocked.
It is necessary to release the motor coupling to allow the sliding door to be opened and closed easily during adjustment.

Motor coupling does not release correctly:



Adjust cables of emergency release for sliding door.

MODEL 900.6 with CODE T63 (Electrical sliding door release))

AR72.16-D-2214CH

3

Close rotary tumbler of door lock (5)

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door), MODEL 906.6/7 with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door)

 Electrical lock striker on C-pillar moves to closing position.

4

Remove fuse 33 for closing assist/right sliding door/ENR or fuse 34 (30 A) left sliding door in driver seat frame

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door), MODEL 906.6/7 with CODE T50 (Vehicles except ) with CODE T51 (Electrical closing assist for left sliding door) with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door)

5

Check whether bolts (3) are seated tightly on sliding block (4)

 Bolt, slider to B-pillar

*BA72.16-N-1010-01A

6

Loosen bolts (1) until guide wedge (2) can be moved

 It must be possible to move the guide wedge (2) during the entire adjustment procedure. Adjust position of guide wedge (2) in relation to sliding block (4) so that the sliding door can be closed during adjustment procedure.

 Bolt, guide wedge to sliding door

*BA72.16-N-1003-01A

7

Adjust gap dimensions (O, P, Q, R) and ridge pattern (A)

MODEL 906.6/7 except CODE D03 (Roof and rear-end doors, high version)

AR72.16-D-1023-01H

MODEL 900.6 with CODE D03 (Roof and rear-end door, high version), MODEL 906.6/7 with CODE D03 (Roof and rear-end door, high version)

AR72.16-D-1023-01I


When adjusting ensure that, during the closing procedure (catch in door lock), the sliding door does not collide with the center guide rail.
Otherwise paint damage can occur.


The specified minimum distance from the sliding door to the center guide rail is prior to the adjustment of the C-pillar gap dimension.
Otherwise the paint can be damaged.

Gap dimension

*BE60.00-N-1007-01C

Bead offset max.

*BE72.16-N-1003-01C

Minimum distance from sliding door to center guide rail

*BE72.16-N-1006-01C

 Bolt, lower carriage to sliding door

*BA72.16-N-1004-01A

 Bolt, upper carriage to sliding door

*BA72.16-N-1005-01A

 Bolt, center carriage to sliding door

*BA72.16-N-1011-01A

 Bolt, lock striker to C-pillar

*BA72.16-N-1017-01A

 Feeler gauge

*129589032100

8

Adjust flatness, installation depth and stop of sliding door

MODEL 906.6/7 except CODE D03 (Roof and rear-end doors, high version)

AR72.16-D-1023-02H

MODEL 900.6 with CODE D03 (Roof and rear-end door, high version), MODEL 906.6/7 with CODE D03 (Roof and rear-end door, high version)

AR72.16-D-1023-02I

 To prevent wind noises, adjust installation depth in area of B-pillar flush up to 1 mm deeper and in area of C-pillar flush up to 1 mm protruded.

 Bolt, guide wedge to sliding door

*BA72.16-N-1003-01A

 Bolt, lower carriage to sliding door

*BA72.16-N-1004-01A

 Bolt, sliding door stop on sliding door

*BA72.16-N-1009-01A

 Bolt, slider to B-pillar

*BA72.16-N-1010-01A

 Bolt, lock striker to C-pillar

*BA72.16-N-1017-01A

 Feeler gauge

*129589032100

9

Check sliding door for easy motion

If the sliding door does not move easily:



Repeat adjustment procedure.

10

Remove fuse 33 for closing assist/right sliding door/ENR or fuse 34 (30 A) left sliding door in driver seat frame

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door), MODEL 906.6/7 with CODE T50 (Vehicles except ) with CODE T51 (Electrical closing assist for left sliding door) with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door)

11.1

Turn release for electric drive (15) 180° counterclockwise to "AUTO" position using key

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door) except CODE T63 (Release for electrical sliding door(s)), MODEL 906.6/7 with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door) except CODE PE4 (Mastercode bus DCAA, Argen company) and except CODE PE5 (Mastercode bus platform seating, Argen company)

11.2

Turn emergency release lever (18) counterclockwise to horizontal position

MODEL 906.657 with CODE PE4 (Mastercode bus DCAA, Argen company) with CODE T55 (Electrical actuation for right sliding door), MODEL 906.657 with CODE PE5 (Mastercode bus platform seating, Argen company) with CODE T55 (Electrical actuation for right sliding door)

11.3

Return lever (20) on outer emergency release (19) to initial position

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door) with CODE T63 (Electrical sliding door release))

Learn in electric sliding door

12.1

Completely open sliding door with switch on center console or B-pillar paneling and close again

MODEL 900.6 with CODE T55 (Electrical actuation for right sliding door), MODEL 906.6/7 with CODE T55 (Electrical actuation for right sliding door) with CODE T56 (Electrical actuation for left sliding door) except CODE PE4 (Mastercode bus DCAA, Argen company) and except CODE PE5 (Mastercode bus platform seating, Argen company)

12.2

Completely open sliding door with switch on center console and close again

MODEL 906.657 with CODE PE4 (Mastercode bus DCAA, Argen company) with CODE T55 (Electrical actuation for right sliding door), MODEL 906.657 with CODE PE5 (Mastercode bus platform seating, Argen company) with CODE T55 (Electrical actuation for right sliding door)



Check

13

Check ridge pattern (A), gaps (O, P, Q, R) as well as evenness of outer panels on sliding door

MODEL 900.6, MODEL 906.6/7

Gap dimension

*BE60.00-N-1007-01C

Bead offset max.

*BE72.16-N-1003-01C

Minimum distance from sliding door to center guide rail

*BE72.16-N-1006-01C

 Feeler gauge

*129589032100

Test and adjustment values for gap dimensions

Number

Designation

MODEL 900 except CODE T55 (Electric sliding door)

MODEL 900 with CODE T55 (Electric sliding door)

BE60.00-N-1007-01C

Gap dimension

Upper sliding door

Dimension "O"

mm

5,5 (1,5)

5,5 (1,5)

Lower sliding door

Dimension "P"

mm

5,5 (1,5)

5,5 (1,5)

Sliding door to B-pillar

Dimension "Q"

mm

7,0 (1,5)

1,0

Sliding door to C-pillar

Dimension "R"

mm

7,0 (1,5)

6 (–1,0)

Picture

AR60.00-D-0700-01H

AR60.00-D-0700-01H

Test and adjustment values for gap dimensions

Number

Designation

MODEL 906.6/7 except CODE T55 except CODE T56 (Electric sliding door) except CODE XM0 (Facelift)

Model 906.6/7 except CODE T55 except T56 (Electric sliding door) with CODE XM0 (Facelift)

BE60.00-N-1007-01C

Gap dimension

Upper sliding door

Dimension "O"

mm

5,5 (1,5)

5,5 (1,5)

Lower sliding door

Dimension "P"

mm

5,5 (1,5)

5,5 (1,5)

Sliding door to B-pillar

Dimension "Q"

mm

7,0 (1,5)

7,0 (1,5)

Sliding door to C-pillar

Dimension "R"

mm

7,0 (1,5)

7,0 (1,5)

Picture

AR60.00-D-0700-01H

AR60.00-D-0700-01H

Test and adjustment values for gap dimensions

Number

Designation

MODEL 906.6/7 with CODE T55/T56 (Electric sliding door) except code XM0 (Facelift)

Model 906.6/7 with CODE T55/T56 (Electric sliding door) with CODE XM0 (Facelift)

BE60.00-N-1007-01C

Gap dimension

Upper sliding door

Dimension "O"

mm

5,5 (1,5)

5,5 (1,5)

Lower sliding door

Dimension "P"

mm

5,5 (1,5)

5,5 (1,5)

Sliding door to B-pillar

Dimension "Q"

mm

1,0

1,0

Sliding door to C-pillar

Dimension "R"

mm

6 (–1,0)

6 (–1,0)

Picture

AR60.00-D-0700-01H

AR60.00-D-0700-01H

Check values for sliding doors

Number

Designation

MODEL 906.6/7 except CODE T55/T56

MODEL 906.6/7 with CODE T55/T56

BE72.16-N-1003-01C

Bead offset max.

mm

1,0

1,0

Check values for sliding doors

Number

Designation

MODEL 900 except CODE T55

MODEL 900 with CODET55

BE72.16-N-1003-01C

Bead offset max.

mm

1,0

1,0

Check values for sliding doors

Number

Designation

MODEL 906.6/7 except CODE T55/T56

MODEL 906.6/7 with CODE T55/T56

BE72.16-N-1006-01C

Minimum distance from sliding door to center guide rail

mm

3...4

3...4

Check values for sliding doors

Number

Designation

MODEL 900 except CODE T55

MODEL 900 with CODET55

BE72.16-N-1006-01C

Minimum distance from sliding door to center guide rail

mm

3...4

3...4

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1003-01A

Bolt, guide wedge to sliding door

Nm

8

8

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1004-01A

Bolt, lower carriage to sliding door

Nm

23

23

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1005-01A

Bolt, upper carriage to sliding door

Nm

23

23

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1009-01A

Bolt, sliding door stop on sliding door

8.8

Nm

23

23

10.9

Nm

32

32

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1010-01A

Bolt, slider to B-pillar

Nm

8

8

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1011-01A

Bolt, center carriage to sliding door

Hexagon socket

Nm

–

–

Torx

Nm

23

23

 Sliding doors

Number

Designation

MODEL 900

MODEL 906.6/7

BA72.16-N-1017-01A

Bolt, lock striker to C-pillar

Nm

20

20