Check toe-out angle

AR40.20-D-0325TSF

Check toe-out angle

01.07.2020

Model

910

with code IT3 (3,0 tonner)

except code IT4 (3,5 tonner)

except code IT9 (4.0 tonner)

Model

910

with code IT4 (3,5 tonner)

except code IT3 (3,0 tonner)

except code IT9 (4.0 tonner)



Check

1

Check toe on front axle.

AR40.20-D-0323TSF

If necessary,



Adjust toe on front axle.

2

Check toe-out angle.

 The steering geometry is checked by measuring the toe-out angle. This is the difference in the steer angle between the outside wheel and the inside wheel when the inside wheel is steered through 20°.

 If substantial deviations exist even though the camber and caster are correct, this may be caused by the following:
Toe not adjusted in straight-ahead position of steering, resulting in tie rods of unequal length.
Tie rod or steering knuckle bent.
Excessive deviations in the front end (longitudinal frame member, frame crossmember, wheel well and firewall, or on the front axle carrier) which have a negative effect on the adjustment range for camber and caster can result in greater differences in the toe-out on turns between left and right.

Model 910.121/621 except code CB4, CB8, RG8, Z12, model 910.123/623 with code A50, CB7, except code CB4, CB8, RG8, Z12, model 910.123/623 except code A50, CB4, CB8, RG8, Z12, model 910.131/631 except code CB4, CB8, RG8, Z12, model 910.133/633 with code A50, CB7, except code CB4, CB8, ME0, RG8, Z12, model 910.133/633 except code A50, CB4, CB8, ME0, RG8, Z12Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1001-08TSF

Model 910.123/623 with code A50, except code CB4, CB7, CB8, RG8, Z12, model 910.133/633 with code A50, except code CB4, CB7, CB8, ME0, RG8, Z12Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1002-08TSF

Model 910.12/62 with code CB8, except code A50, CB4, CB7, RG8, Z12, model 910.13/63 with code CB8, except code A50, CB4, CB7, ME0, RG8, Z12Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1003-08TSF

Model 910.1/6 with code A50, CB8, except code CB4, CB7, ME0, RG8, Z12Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1004-08TSF

Model 910.0 with code A50, except code RG8, model 910.0 with code RG8, model 910.1 with code CB4, except code CB7, CB8, RG8, Z12Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1005-08TSF

Model 910.1/6 with code IT3, RG8, except code CB4, CB7, CB8, ME0, Z12, model 910.1/6 with code IT4, RG8, except code CB7, ME0, Z12, model 910.1/6 with code Z12, except code A50, CB4, CB7, CB8, ME0Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1006-08TSF

Model 910.633 with code ME0Toe-out angle with 20° steering movement (inner wheel)

*BE40.20-N-1007-08TSF

If larger deviations are present,



determine causes and perform suitable measures.

 After obtaining special order.

Toe-out angle

Number

Designation

Model 910.121/621 with code IT3, except CB4, CB8, RG8, Z12,
model 910.123/623 with code A50, CB7, IT3, except code CB4, CB8, RG8, Z12,
model 910.123/623 with code IT3, except code A50, CB4, CB8, RG8, Z12,
model 910.131/631 with code IT4, except CB4, CB8, RG8, Z12,
model 910.133/633 with code A50, CB7, IT4, except code CB4, CB8, ME0, RG8, Z12,
model 910.133/633 with code IT4, except code A50, CB4, CB8, ME0, RG8, Z12

BE40.20-N-1001-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 1.80° / front axle load 1750 kg

°

0,73° (30')

Angle of front axle shaft 2.50° / front axle load 1690 kg

°

0,53° (30')

Angle of front axle shaft 3.10° / front axle load 1630 kg

°

0,33° (30')

Angle of front axle shaft 3.80° / front axle load 1570 kg

°

0,15° (30')

Angle of front axle shaft 4.40° / front axle load 1510 kg

°

-0,04° (30')

Angle of front axle shaft 5.00° / front axle load 1450 kg

°

-0,21° (30')

Angle of front axle shaft 5.60° / front axle load 1390 kg

°

-0,39° (30')

Angle of front axle shaft 6.30° / front axle load 1330 kg

°

-0,55° (30')

Angle of front axle shaft 6.90° / front axle load 1270 kg

°

-0,72° (30')

Angle of front axle shaft 7.50° / front axle load 1210 kg

°

-0,87° (30')

Toe-out angle

Number

Designation

Model 910.123/623 with code A50 IT3, except code CB4 CB7 CB8, RG8, Z12,
model 910.133/633 with code A50 IT4 CB4, except code CB7 CB8 ME0, RG8, Z12

BE40.20-N-1002-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 1.80° / front axle load 1850 kg

°

0,73° (30')

Angle of front axle shaft 2.50° / front axle load 1790 kg

°

0,53° (30')

Angle of front axle shaft 3.10° / front axle load 1730 kg

°

0,33° (30')

Angle of front axle shaft 3.80° / front axle load 1670 kg

°

0,14° (30')

Angle of front axle shaft 4.40° / front axle load 1610 kg

°

-0,04° (30')

Angle of front axle shaft 5.10° / front axle load 1550 kg

°

-0,22° (30')

Angle of front axle shaft 5.70° / front axle load of 1490 kg

°

-0,40° (30')

Angle of front axle shaft 6.30° / front axle load 1430 kg

°

-0,57° (30')

Angle of front axle shaft 6.90° / front axle load 1370 kg

°

-0,73° (30')

Angle of front axle shaft 7.50° / front axle load 1310 kg

°

-0,89° (30')

Toe-out angle

Number

Designation

Model 910.12/62 with code CB8 IT3, except code A50 CB4 CB7, RG8, Z12,
model 910.13/63 with code CB8 IT4 A50, except code CB4 CB7 ME0, RG8, Z12

BE40.20-N-1003-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 1.80° / front axle load 1750 kg

°

0,73° (30')

Angle of front axle shaft 2.40° / front axle load 1690 kg

°

0,55° (30')

Angle of front axle shaft 3.00° / front axle load 1630 kg

°

0,38° (30')

Angle of front axle shaft 3.50° / front axle load 1570 kg

°

0,22° (30')

Angle of front axle shaft 4.10° / front axle load 1510 kg

°

0,05° (30')

Angle of front axle shaft 4.70° / front axle load 1450 kg

°

-0,11° (30')

Angle of front axle shaft 5.20° / front axle load 1390 kg

°

-0,27° (30')

Angle of front axle shaft 5.80° / front axle load 1330 kg

°

-0,43° (30')

Angle of front axle shaft 6.40° / front axle load 1270 kg

°

-0,59° (30')

Angle of front axle shaft 7.00° / front axle load 1210 kg

°

-0,74° (30')

Toe-out angle

Number

Designation

Model 910.1/6 with code A50 CB8 IT3, except code CB4 CB7 ME0, RG8, Z12,
model 910.1/6 with code A50 CB8 IT4 CB4, except code CB7 ME0 RG8, Z12

BE40.20-N-1004-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 0.90° / front axle load 1850 kg

°

1,02° (30')

Angle of front axle shaft 1.50° / front axle load 1790 kg

°

0,84° (30')

Angle of front axle shaft 2.00° / front axle load 1730 kg

°

0,67° (30')

Angle of front axle shaft 2.60° / front axle load 1670 kg

°

0,50° (30')

Angle of front axle shaft 3.20° / front axle load 1610 kg

°

0,33° (30')

Angle of front axle shaft 3.70° / front axle load 1550 kg

°

0,16° (30')

Angle of front axle shaft 4.30° / front axle load 1490 kg

°

0,00° (30')

Angle of front axle shaft 4.90° / front axle load 1430 kg

°

-0,17° (30')

Angle of front axle shaft 5.40° / front axle load 1370 kg

°

-0,33° (30')

Angle of front axle shaft 6.00° / front axle load 1310 kg

°

-0,48° (30')

Toe-out angle

Number

Designation

Model 910.0 with code A50, IT3, except code RG8,
model 910.0 with code A50, IT4, except code RG8,
model 910.0 with code IT3, RG8,
model 910.0 with code IT4, RG8,
model 910.1 with code CB4, IT3, except code CB7, CB8, RG8, Z12,
model 910.1 with code CB4, IT4, except code CB7, CB8, RG8, Z12

BE40.20-N-1005-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 1.80° / front axle load 1850 kg

°

0,72° (30')

Angle of front axle shaft 2.40° / front axle load 1790 kg

°

0,55° (30')

Angle of front axle shaft 3.00° / front axle load 1730 kg

°

0,38° (30')

Angle of front axle shaft 3.50° / front axle load 1670 kg

°

0,22° (30')

Angle of front axle shaft 4.10° / front axle load 1610 kg

°

0,05° (30')

Angle of front axle shaft 4.70° / front axle load 1550 kg

°

-0,11° (30')

Angle of front axle shaft 5.20° / front axle load 1490 kg

°

-0,27° (30')

Angle of front axle shaft 5.80° / front axle load 1430 kg

°

-0,43° (30')

Angle of front axle shaft 6.40° / front axle load 1370 kg

°

-0,58° (30')

Angle of front axle shaft 7.00° / front axle load 1310 kg

°

-0,74° (30')

Toe-out angle

Number

Designation

Model 910.1/6 with code IT3, RG8, except code CB4, CB7, CB8, ME0, Z12,
model 910.1/6 with code IT4, RG8, except code CB7, ME0, Z12,
model 910.1/6 with code IT3, Z12, except code A50, CB4, CB7, CB8, ME0
model 910.1/6 with code IT4, Z12, except code A50, CB4, CB7, CB8, ME0

BE40.20-N-1006-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 2.50° / front axle load 2000 kg

°

0,80° (30')

Angle of front axle shaft 3.00° / front axle load 1940 kg

°

0,65° (30')

Angle of front axle shaft 3.50° / front axle load 1880 kg

°

0,50° (30')

Angle of front axle shaft 4.10° / front axle load 1820 kg

°

0,35° (30')

Angle of front axle shaft 4.60° / front axle load 1760 kg

°

0,21° (30')

Angle of front axle shaft 5.10° / front axle load 1700 kg

°

0,07° (30')

Angle of front axle shaft 5.70° / front axle load 1640 kg

°

-0,07° (30')

Angle of front axle shaft 6.20° / front axle load 1580 kg

°

-0,21° (30')

Angle of front axle shaft 6.70° / front axle load 1520 kg

°

-0,35° (30')

Angle of front axle shaft 7.30° / front axle load 1460 kg

°

-0,48° (30')

Toe-out angle

Number

Designation

Model 910.633 with code IT3 ME0,
model 910.633 with code IT4, ME0

BE40.20-N-1007-08TSF

Toe-out angle with 20° steering movement (inner wheel)

Angle of front axle shaft 4.70° / front axle load 1750 kg

°

0,19° (30')

Angle of front axle shaft 5.20° / front axle load 1690 kg

°

0,05° (30')

Angle of front axle shaft 5.70° / front axle load 1630 kg

°

-0,09° (30')

Angle of front axle shaft 6.30° / front axle load 1570 kg

°

-0,23° (30')

Angle of front axle shaft 6.80° / front axle load 1510 kg

°

-0,37° (30')

Angle of front axle shaft 7.40° / front axle load 1450 kg

°

-0,50° (30')

Angle of front axle shaft 7.90° / front axle load 1390 kg

°

-0,63° (30')

Angle of front axle shaft 8.40° / front axle load 1330 kg

°

-0,77° (30')

Angle of front axle shaft 9.00° / front axle load 1270 kg

°

-0,89° (30')

Angle of front axle shaft 9.50° / front axle load 1210 kg

°

-1,02° (30')