Model | 906.131/133/135/23/63/73 |
with code C15 (Vehicle lowering) | |
except code A50 (Front axle with increased load capacity) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) | |
except code ZU8 (National version for USA) |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1009-13A | Camber with front-axle load of 1650 kg | or for transverse control arm angle | ° | -2,6 | ||
Permissible camber value | Min. | ° | 0°-50' | |||
max. | ° | 0°10' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-25' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-40' | |||
For significant wear on outside shoulder of tire | ° | 0°-50' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1010-13A | Camber with front-axle load of 1600 kg | or for transverse control arm angle | ° | -2,2 | ||
Permissible camber value | Min. | ° | 0°-47' | |||
max. | ° | 0°13' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-22' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-37' | |||
For significant wear on outside shoulder of tire | ° | 0°-47' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1011-13A | Camber with front-axle load of 1550 kg | or for transverse control arm angle | ° | -1,7 | ||
Permissible camber value | Min. | ° | 0°-44' | |||
max. | ° | 0°16' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-19' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-34' | |||
For significant wear on outside shoulder of tire | ° | 0°-44' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1012-13A | Camber with front-axle load of 1500 kg | or for transverse control arm angle | ° | -1,3 | ||
Permissible camber value | Min. | ° | 0°-40' | |||
max. | ° | 0°20' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-15' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-30' | |||
For significant wear on outside shoulder of tire | ° | 0°-40' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1013-13A | Camber with front-axle load of 1450 kg | or for transverse control arm angle | ° | -0,7 | ||
Permissible camber value | Min. | ° | 0°-35' | |||
max. | ° | 0°25' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-10' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-25' | |||
For significant wear on outside shoulder of tire | ° | 0°-35' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1014-13A | Camber with front-axle load of 1400 kg | or for transverse control arm angle | ° | -0,2 | ||
Permissible camber value | Min. | ° | 0°-31' | |||
max. | ° | 0°29' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-6' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-21' | |||
For significant wear on outside shoulder of tire | ° | 0°-31' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1015-13A | Camber with front-axle load of 1350 kg | or for transverse control arm angle | ° | 0,4 | ||
Permissible camber value | Min. | ° | 0°-25' | |||
max. | ° | 0°35' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°0' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-15' | |||
For significant wear on outside shoulder of tire | ° | 0°-25' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1016-13A | Camber with front-axle load of 1300 kg | or for transverse control arm angle | ° | 1,1 | ||
Permissible camber value | Min. | ° | 0°-19' | |||
max. | ° | 0°41' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°6' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-9' | |||
For significant wear on outside shoulder of tire | ° | 0°-19' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1017-13A | Camber with front-axle load of 1250 kg | or for transverse control arm angle | ° | 1,8 | ||
Permissible camber value | Min. | ° | 0°-13' | |||
max. | ° | 0°47' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°12' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-3' | |||
For significant wear on outside shoulder of tire | ° | 0°-13' |
Test and adjustment values for front axle camber |
Number | Designation | Model 906.131/133/135/23/63/73 with code C15 except code A50/ZG1/ZG3/ZU7/ZU8 | ||||
BE40.20-D-1018-13A | Camber with front-axle load of 1200 kg | or for transverse control arm angle | ° | 2,5 | ||
Permissible camber value | Min. | ° | 0°-11' | |||
max. | ° | 0°49' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°14' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-1' | |||
For significant wear on outside shoulder of tire | ° | 0°-11' |
1 | Note down the permissible camber value in the table based on the determined front-axle level. |
2 | Compare the permissible camber value against the actual value from the wheel alignment check. |
Observe permissible difference in front axle camber between right and left sides of the vehicle. |
3 | Determine level of wear on outside shoulder of tire. |
For an actual value within the permissible camber value and with wear on outside shoulder of the tire. |
If the difference between the inner and outer tire tread channel depth is greater than 2 mm, there is a high level of wear on the outside shoulder of the tire. |
4 | Take adjustment value from table and note down. |